Gate Installation in Irving, TX | Everest Gate Repair Service Dallas Fort Worth

Gate Installation in Irving - Free Estimate, One Written Price

Free on-site estimate and a written price that includes the site prep, the power run and the safety gear. Install date agreed before we order, and the system handed over tested and documented.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Up to 11
Years Technician Experience
707+
5-Star Reviews
Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Fast, Reliable Gate Installation Across Irving

Gate installation in Irving typically runs $2,800–$7,500 for residential automated systems and $8,500–$22,000 for commercial-grade installations, with most projects completed in 2–5 business days after HOA or permit approval. We’re based right here in Irving, so Dennis and his team can reach Valley Ranch, Las Colinas, or south Irving neighborhoods within the hour for measurements and estimates. Call (855) 914-8517 for a free, on-site quote - no guesswork, no templated proposals.

Two technicians installing a decorative metal driveway gate in Irving, TX

Call (855) 914-8517

Irving isn’t a cookie-cutter suburb. You’ve got 1960s ranch homes near Airport Freeway with original chain-link fences begging for a proper swing gate upgrade, and you’ve got master-planned Las Colinas communities where the architectural review board scrutinizes every weld and paint chip. We’ve spent 11 years navigating both worlds. Our Gate Installation crew knows which Valley Ranch HOAs require Elite operators with whisper-quiet gear reduction, and which Las Colinas office parks run FAAC hydraulic arms on crash-rated barriers. That local fluency saves you from the costly do-overs we’ve seen other companies deliver.

Why Everest Gate Repair Service Dallas Fort Worth Is Irving’s Preferred Gate Installation Company

In Irving specifically, we’ve installed and serviced gates from the old Texaco tract homes off Story Road to the corporate campuses along Las Colinas Boulevard. Residents recognize our team in Valley Ranch because we’ve been there dozens of times, matching ornamental iron specs that ARBs actually approve.

Our response time to Irving averages under 45 minutes because we’re stationed here, not dispatching from Plano or Fort Worth. When a Las Colinas property manager calls about a failed access-control gate blocking employee parking at 7 a.m., Dennis handles it personally - owner, lead technician, decision-maker on-site.

Eleven years specializing exclusively in gates means we’ve seen Irving’s specific failure patterns: black clay soil heaving posts after the first wet spring, summer heat frying control boards on east-facing operators, ice storms bending aluminum pedestrian gates that seemed fine in October. General handymen don’t account for this. We do.

Our Gate Installation Services in Irving

Swing Gate Installation

Swing gates dominate Irving’s older neighborhoods - south Irving’s 1970s ranch homes, the wood-fenced properties off Belt Line Road, anywhere there’s room for a 90-degree arc. We install single and double swing configurations, always accounting for that black clay soil heave with deeper post footings and adjustable hinge hardware. In Valley Ranch and Las Colinas, we pre-coordinate with HOA architectural review boards to ensure the ornamental iron pattern, powder coat finish, and operator housing color match community standards exactly. We checked the ARB requirements first.

Swing Gate Installation

Security Gate Installation

Irving’s commercial density demands serious security infrastructure. Las Colinas hosts Fortune 500 campuses, major hotels, and medical facilities where crash-rated barriers and access-control integration aren’t optional - they’re code. We install security gates with integrated card readers, loop detectors, and telephone entry systems, spec’ing operators rated for high-cycle use that won’t burn out under morning and evening rushes. Our welding capability matters here: when a delivery truck clips a barrier arm, we fabricate and weld replacements on-site rather than waiting weeks for factory parts. That’s the difference between a security gap and same-day restoration.

Security Gate Installation

Sliding Gate Installation

Sliding gates solve the space problem - no swing arc needed, perfect for Irving’s narrower lots and commercial driveways with limited setback. We install cantilever and track-mounted systems, always spec’ing v-groove wheels and heavy-duty chain drives that handle the lateral stress from clay-soil movement better than rack-and-pinion setups. In Las Colinas office parks, we’ve replaced track systems destroyed by inadequate drainage; our installations include graded concrete pads that shed water away from the mechanism. For residential sliding gates in Valley Ranch, we match the ornamental iron scrollwork and finial patterns that ARBs enforce, even when that means custom-fabricating side panels to maintain visual continuity.

Sliding Gate Installation

Pedestrian Gate Installation

Not every gate needs a motor. We install manual pedestrian gates throughout Irving’s older neighborhoods - wrought iron walk-throughs, pool-code-compliant latches, self-closing hinges for safety. But we also automate pedestrian gates where needed, spec’ing low-voltage Mighty Mule or Ghost Controls operators for residential use, or robust FAAC hydraulic systems for commercial pedestrian access points. Ice storm vulnerability is real here: we avoid lightweight aluminum for exposed pedestrian gates, sticking to steel frames that won’t deform under the load of frozen precipitation.

Professional contractor performing metal gate installation and repair in Irving, TX
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 914-8517

Trusted Brands We Service in Irving

Your brand, our expertise - that’s the operating principle. We stock and install LiftMaster, Elite, and FAAC operators locally, with same-day or next-day parts availability for most Irving jobs. If your Las Colinas HOA originally spec’d Elite hardware, we source Elite. If your commercial property runs FAAC hydraulics, we know the pressure settings and cycle limits. We weld, we wire, we repair - and we keep the right control boards, gearboxes, and safety sensors on hand to finish in one trip.

Common Gate Installation Problems We See in Irving Homes

  • Non-conforming finishes trigger HOA violations. In Valley Ranch and Las Colinas, installing a gate panel with the wrong ornamental iron pattern or a slightly off-black powder coat means the ARB rejects it - and you’re paying twice. We pull the original spec sheets before ordering anything.
  • Standard-duty operators fail on high-cycle commercial gates. Las Colinas office parks and hotel properties run hundreds of cycles daily. Residential-grade Mighty Mule or Ghost Controls hardware burns out in months. We spec commercial-duty LiftMaster or FAAC operators with proper duty-cycle ratings from day one.
  • Black clay soil heave destroys post alignment. Irving’s expansive clay swells when wet, shrinks when dry. Shallow post footings and rigid hinge setups guarantee sagging gates within two seasons. We pour deeper footings with drainage gravel and use adjustable hinge systems that can be reset without re-pouring concrete.
  • Summer heat degrades control electronics. East- and south-facing operators without shade covers see control board failures after 2–3 Irving summers. We spec heat-resistant enclosures, recommend mounting positions with afternoon shade where possible, and install ventilated operator housings on commercial systems.

Pricing for Gate Installation in Irving, TX

Gate Type Typical Range in Irving What Affects Cost
Single swing gate (manual, steel) $2,800–$4,200 Ornamental iron complexity, ARB-matching requirements, post depth for clay soil
Double swing gate (automated) $5,500–$9,500 Operator brand/grade, access control integration, HOA finish matching
Sliding gate (residential) $6,200–$10,500 Track vs. cantilever, gate weight/length, drainage engineering
Security/crash barrier (commercial) $8,500–$22,000 Crash rating, loop detector systems, card reader integration, welding fabrication
Pedestrian gate (manual) $1,800–$3,400 Material gauge, ornamental details, self-closing hardware

These ranges reflect actual Irving-market pricing for 2024–2025, including ARB coordination, clay-soil-rated footings, and code-compliant installation. Every estimate we provide is itemized - gate fabrication, operator, access hardware, concrete work, electrical - so you see where your money goes. Call (855) 914-8517 for a free, no-obligation quote at your Irving property.

We Also Serve Cities Near Irving

Our shop sits central to the metroplex, so we regularly install gates in Farmers Branch along the Valley View corridor, University Park and Highland Park where estate properties require custom ornamental work, and throughout Dallas proper from Oak Cliff to Preston Hollow.

Serving Irving, TX - Our Local Coverage Area

We’re serving the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs - Gate Installation in Irving

Why Irving Chooses Everest Gate Repair Service Dallas Fort Worth

We set the standard for gate installation in Irving.

Irving-Specific Response

Our team is based in the DFW area and prioritizes Irving service calls - meaning shorter lead times, faster same-day availability, and technicians familiar with local property types and soil conditions.

Residential & Commercial Coverage

We service single-family driveways, HOA entry gates, apartment communities, and commercial facilities throughout Irving with equal depth of expertise and documentation.

Transparent Pricing, No Surprises

Every estimate is written and itemized before work begins. If scope changes on-site, we stop, explain, and get your approval - your budget is treated with the same precision as your gate.

What Irving Customers Say

Trusted by homeowners across Irving and surrounding areas.

★★★★★

"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."

Yusuf Aziz
★★★★★

"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."

Jessica Lin
★★★★★

"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."

Brianna Jackson

How It Works in Irving

Getting your gate installation handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate installation needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Irving - typically within 30–60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

Ready for Gate Installation in Irving?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Irving.

(855) 914-8517

Request a Free Estimate in Irving

Tell us about your gate installation needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Areas We Serve
Call Now - 24/7 Dispatch