Gate Installation in Keller, TX | Everest Gate Repair Service Dallas Fort Worth

Gate Installation in Keller - Free Estimate, One Written Price

Free on-site estimate and a written price that includes the site prep, the power run and the safety gear. Install date agreed before we order, and the system handed over tested and documented.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Up to 11
Years Technician Experience
707+
5-Star Reviews
Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Fast, Reliable Gate Installation Across Keller

Gate installation in Keller, TX typically runs $2,800–$7,500 for a complete automated driveway system, and most projects are completed in 1–3 days once materials arrive. We’re serving Irving and regularly make the run up to Keller - usually within 45 minutes for estimates, and we carry common LiftMaster, FAAC, and DoorKing hardware so we’re not waiting on freight.

Two technicians installing a decorative metal driveway gate in Keller, TX

Call (855) 914-8517

Keller’s a different animal than most DFW suburbs. The lots are bigger, the gates are wider, and a lot of what got installed in the 2005–2010 build boom is hitting the wall right now. Dennis and his team have spent eleven years specializing exclusively in gates, and we’ve learned that Gate Installation in Keller isn’t about dropping in a standard kit - it’s about engineering for black clay soil, triple-digit heat, and driveways that stretch a lot farther than the original builder anticipated.

Why Everest Gate Repair Service Dallas Fort Worth Is Keller’s Preferred Gate Installation Company

We’ve got 707 reviews averaging 4.8 stars, and a solid chunk of those come from Keller homeowners who found us after the second or third “repair” from a general handyman didn’t stick. That matters when you’re diagnosing whether a grinding operator is a simple gear issue or a symptom of an undersized motor that’s been overloaded for fifteen years.

Our response time to Keller is typically same-day or next-day for estimates, and we keep parts in stock for the nine brands we service - LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. No trial-and-error ordering. No “we’ll come back when the part gets here.”

We also weld. In-house. That’s rarer than you’d think, and it’s critical in Keller where black clay heave can crack hinge posts or twist ornamental iron frames. We fix structural damage on-site instead of farming it out to a metal shop for two weeks.

Our Gate Installation Services in Keller

Driveway Gate Installation

Keller’s master-planned communities - think along Keller-Smithfield Road or in the 76248 zip - were built with generous setbacks and wide approaches. We’ve measured driveways out by Bear Creek Parkway that run 22 feet across, yet the original builder spec’d a residential-grade operator rated for 16 feet. That gap kills motors. Our driveway gate installations in Keller start with proper load calculation: gate weight, wind load, cycle frequency, and actual span. Then we size the operator correctly, usually a commercial-grade unit that won’t flinch at a 6-foot gate leaf in a Texas wind.

Driveway Gate Installation

Swing Gate Installation

Single-leaf and dual-leaf swing gates dominate Keller’s older subdivisions - the 1990s and 2000s builds around Mount Gilead Road and Rufe Snow Drive. These systems fail predictably: hinge posts tilt in expanding clay, gate arms bind, operators grind. We install swing gates with deeper post anchoring - 42 inches minimum into black clay, often with concrete piers - and we brace ornamental iron frames at the factory level, not as an afterthought. A properly installed swing gate in Keller should open smoothly even after a week of August drought followed by a September gully-washer.

Swing Gate Installation

Sliding Gate Installation

Sliding gates make sense on Keller’s sloped lots and curved driveways where a swing arc won’t work. But the track system is unforgiving. We’ve replaced slide gates in the 76244 area where the original track was set on a concrete pad that heaved seasonally, throwing the v-groove wheels off alignment and shredding the rack gear. Our sliding gate installations include adjustable track mounts, proper drainage planning, and operators sized for the actual gate mass - not the catalog guess.

Sliding Gate Installation

Pedestrian Gate Installation

Not every gate in Keller is for cars. We install matching pedestrian gates alongside driveway systems - wrought iron walk-throughs with keypad or fob access, integrated into the same access control network. These get heavy use in Keller’s active neighborhoods, and we build them to the same structural standard as the main gate, not as a flimsy afterthought.

Professional contractor performing metal gate installation and repair in Keller, TX
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 914-8517

Trusted Brands We Service in Keller

We work on nine major brands - LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule - and we stock parts for the ones we see most in Keller. LiftMaster and FAAC dominate the residential automatic market here; DoorKing and Elite show up frequently on HOA and commercial entrances. Because Dennis carries inventory and knows these systems cold, we don’t guess at diagnostics. We identify your brand, pull the correct gear kit or control board, and get it running. Fast turnaround means your gate isn’t stuck open for a week while you wait for a part from California.

Common Gate Installation Problems We See in Keller Homes

  • Undersized operators on oversized gates. Keller’s lots are well above DFW average, and many driveway spans exceed 20 feet. Builder-installed residential operators - often Mighty Mule or entry-level LiftMaster units - were never rated for the actual load. The motor overheats, gears strip, and the homeowner gets told “it just needs a tune-up” three times before someone measures the gate.
  • Clay soil heave throwing posts out of plumb. North Texas black clay expands and contracts dramatically with moisture. We’ve found hinge posts tilted 3 degrees off vertical in Keller subdivisions, binding gate arms and bending operator brackets. Proper installation accounts for this with deeper footings and adjustable hardware.
  • Ornamental iron frames sagging without adequate bracing. Builder-grade gates in Keller’s 2000s-era homes often lack diagonal bracing or welded corner gussets. Automated operation adds cyclic stress, and within five years the frame racks, latches misalign, and the operator fights itself.
  • UV degradation of exposed electronics. Keller’s summer heat routinely hits 105°F, and operators mounted in direct sun - common on south-facing driveways near Keller Parkway - suffer cracked housings, brittle wiring insulation, and failed limit-switch boots. We spec UV-resistant enclosures and shade-mounted control boxes where possible.

Pricing for Gate Installation in Keller, TX

A typical manual pedestrian gate installation in Keller runs $1,200–$2,400. Automated single-leaf swing gates start around $2,800–$4,500 installed, while dual-leaf systems with commercial-grade operators land in the $4,200–$6,800 range. Sliding gates with track, motor, and access control typically run $5,500–$7,500 depending on span and material. These are 2024–2025 Keller market ranges - your actual cost depends on gate material (aluminum vs. steel vs. ornamental iron), operator brand and horsepower, access control features, and whether we need to demo and remove an existing system.

We don’t do ballpark-over-the-phone pricing. Dennis comes out, measures your actual span, checks post condition and soil type, and gives you a written estimate with line-item breakdown. Estimates are free. Call (855) 914-8517 to schedule.

We Also Serve Cities Near Keller

Our service radius covers the full northern Tarrant County corridor. We regularly install and repair gates in Watauga, North Richland Hills, Roanoke, and Saginaw

Serving Keller, TX - Our Local Coverage Area

We’re serving the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs - Gate Installation in Keller

Why Keller Chooses Everest Gate Repair Service Dallas Fort Worth

We set the standard for gate installation in Keller.

Irving-Specific Response

Our team is based in the DFW area and prioritizes Irving service calls - meaning shorter lead times, faster same-day availability, and technicians familiar with local property types and soil conditions.

Residential & Commercial Coverage

We service single-family driveways, HOA entry gates, apartment communities, and commercial facilities throughout Irving with equal depth of expertise and documentation.

Transparent Pricing, No Surprises

Every estimate is written and itemized before work begins. If scope changes on-site, we stop, explain, and get your approval - your budget is treated with the same precision as your gate.

What Keller Customers Say

Trusted by homeowners across Keller and surrounding areas.

★★★★★

"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."

Yusuf Aziz
★★★★★

"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."

Jessica Lin
★★★★★

"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."

Brianna Jackson

How It Works in Keller

Getting your gate installation handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate installation needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Keller - typically within 30–60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

Ready for Gate Installation in Keller?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Keller.

(855) 914-8517

Request a Free Estimate in Keller

Tell us about your gate installation needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Areas We Serve
Call Now - 24/7 Dispatch