Gate Motor & Opener in Keene, TX | Everest Gate Repair Service Dallas Fort Worth

Gate Motor & Opener in Keene - Free Estimate, One Written Price

Free on-site estimate and a written price that includes the site prep, the power run and the safety gear. Install date agreed before we order, and the system handed over tested and documented.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Up to 11
Years Technician Experience
707+
5-Star Reviews
Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Fast, Reliable Gate Motor & Opener Across Keene

Gate motor repair in Keene typically runs $280–$650 for most residential jobs, with same-day or next-day service available throughout the 76059 area. We’re familiar with the specific challenges Keene properties face - from the clay-soil gate post shifts along Co Rd 3031 to the aging ranch-style hardware common near Southwestern Adventist University - and we carry parts for our Gate Motor & Opener service calls to minimize wait times. Dennis and his team respond to Keene within the hour during emergencies, and we stock Linear, FAAC, and Viking components based on what we see most often in Johnson County’s semi-rural properties. Call (855) 914-8517 for a free estimate.

Technician using multimeter to repair electronic gate motor control board in Keene, TX

Call (855) 914-8517

Why Everest Gate Repair Service Dallas Fort Worth Is Keene’s Preferred Gate Motor & Opener Company

We’ve built our reputation in Keene one repair at a time - 707 reviews averaging 4.8 stars, with many coming from Johnson County homeowners who’ve watched us excavate post footings others wouldn’t touch.

Our response time to Keene averages under 45 minutes for urgent calls - we know that a stuck gate on an acreage lot off 917 or Old Betsy Road isn’t just inconvenient, it’s a security gap that leaves livestock or property exposed. We’ve replaced motors in the morning and returned for welding adjustments after the afternoon clay swell shifted the frame. That follow-through is why Keene customers call us back.

Eleven years specializing exclusively in gates means we’ve seen Keene’s specific failure patterns before: the 1980s-era Mighty Mule still clinging to life, the DoorKing board fried by a June thunderstorm surge, the slide gate binding because the post leaned another inch after last week’s rain. We don’t guess. We diagnose.

Our Gate Motor & Opener Services in Keene

Motor Installation

New motor installation in Keene runs $480–$1,200 depending on gate weight, access to power, and whether we’re dealing with fresh posts or clay-compromised footings. On acreage properties near the university or along rural routes, we often recommend deeper pier reinforcement before any motor goes in - a gate motor can’t compensate for a frame that shifts four inches seasonally. We install Linear, FAAC, Viking, and five other brands, matching the motor to your gate’s actual movement pattern, not just its dimensions.

Motor Installation

Motor Repair

Repair calls in Keene typically cost $280–$450 when the motor itself is salvageable - control board replacement, gear kit rebuilds, limit switch realignment. But here’s what separates our diagnostics: we check post plumb first. Last spring, we responded to a call on Co Rd 3031 where a homeowner’s 20-year-old LiftMaster slide motor had burned out trying to open a gate that had shifted 4 inches due to clay movement. Instead of a simple motor swap, we excavated the post footing to 4 feet below grade, poured a reinforced concrete pier, and then installed a new FAAC 412 slide operator with a battery backup – ensuring the gate stays aligned through Keene’s wet-dry cycles. The motor wasn’t the problem. The footing was.

Motor Repair

Linear Motor Service

Linear motors are our most frequent installation in Keene’s older residential stock - compact, reliable, and well-suited to the single-swing ornamental gates common in 1970s–1990s neighborhoods. Linear actuator replacement runs $320–$580; full new Linear system installation with arm and control box is $520–$890. We keep Linear LA500 and LA412 arms in stock because they’re the right match for Keene’s lighter residential gates, and we know which models tolerate the frame flex that clay soil induces.

Linear Motor Service

Slide Motor Service

Slide motors dominate Keene’s acreage and pipe-gate installations - properties with 20-foot openings where swing gates aren’t practical. Slide motor repair in Keene: $340–$620. New chain-drive or rack-and-pinion installation: $680–$1,400. The critical factor on every Keene slide gate is track alignment, and track alignment depends on post stability. We weld, we wire, we repair - and on Keene’s black clay, that means we also pour concrete to depths that prevent the seasonal heave from destroying whatever motor we install.

Battery Backup

Keene’s summer thunderstorm power outages and occasional winter ice events make battery backup essential, not optional. Battery backup installation adds $180–$320 to any motor job. We spec sealed AGM batteries rated for North Texas heat - the cheap wet-cell batteries sold online cook in 100°F July afternoons and leave you stranded when the grid drops. For the FAAC 412 we installed on Co Rd 3031, the battery backup meant the gate worked through three outage events last year alone.

Intercom Integration

Intercom and access control integration runs $340–$780 depending on existing wiring and whether we’re retrofitting a 1990s two-wire system or pulling fresh cable. Keene’s older homes often have intercoms that outlived their original gate motor - we can interface modern openers with legacy call boxes, or upgrade the full stack. Dennis handles the low-voltage wiring personally; no subcontractor guessing at your pinout.

Technician performing professional repair on an automatic gate motor and opener system in Keene, TX
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 914-8517

Trusted Brands We Service in Keene

Your brand, our expertise - that’s the promise. We carry parts and factory-trained experience across nine gate operator brands, but in Keene we see Linear, FAAC, and Viking most often on residential and light commercial jobs. Linear for the compact swing-arm retrofits on older homes. FAAC for the hydraulic slide operators that handle Keene’s heavier ranch gates without straining. Viking for the occasional commercial installation near the university or on rental properties. We don’t show up to “see what might fit.” We show up with the right board, the right arm, or the right gear kit already on hand.

Common Gate Motor & Opener Problems We See in Keene Homes

  • Motor burnout from clay-soil strain. In Keene, the dominant gate motor failure is not the motor itself but the chronic misalignment caused by the shrinking and swelling of the local Blackland Prairie clay soil, which pulls gate posts out of plumb and forces openers to work against binding frames. The motor overheats, strips gears, or burns out entirely - and replacing it without fixing the post is throwing money into the same hole.
  • Control board failure from summer thunderstorm surges. North Texas lightning season fries electronics. We replace DoorKing, Elite, and Mighty Mule boards regularly after June and July storms, and we spec surge protection on every new install.
  • Chain or belt wear from ice buildup. Keene’s occasional winter ice storms - the same events that lock up DFW freeways - freeze gate hardware, crack welds, and stress slide-gate chains. We see accelerated wear every January and February on systems that weren’t lubricated or tensioned before the freeze.
  • Obsolete parts on 1980s–1990s operators. Keene’s housing stock includes decades-old gate hardware with discontinued control boards, proprietary gearboxes, or pre-UL safety systems. We source NOS parts when possible, but we’re direct about when retrofitting a modern Linear or FAAC unit is the smarter spend.

Pricing for Gate Motor & Opener in Keene, TX

Service Typical Range in Keene
Diagnostic/service call $85–$125
Motor repair (control board, gears, limits) $280–$450
Linear actuator replacement $320–$580
Slide motor repair $340–$620
New Linear motor installation $520–$890
New slide motor installation $680–$1,400
Battery backup add-on $180–$320
Post excavation & pier reinforcement $380–$750
Intercom/access control integration $340–$780

What moves you toward the higher end: clay-compromised footings requiring excavation, 220V power runs to remote acreage gates, heavy-duty operators for commercial-grade gates, or access control integration with existing intercom wiring that’s degraded. We quote upfront - the price we give is the price you pay. Free estimates mean you know before we start. Call (855) 914-8517.

We Also Serve Cities Near Keene

Our service radius covers Johnson County and southern Tarrant County regularly - we respond to Joshua, Burleson, Crowley, and Everman with the same stock of parts and same-day availability we bring to Keene. Clay soil issues diminish west of Joshua but persist throughout this corridor; we adjust our footing specs accordingly.

Serving Keene, TX - Our Local Coverage Area

We’re serving the Keene area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs - Gate Motor & Opener in Keene

Why Keene Chooses Everest Gate Repair Service Dallas Fort Worth

We set the standard for gate motor & opener in Keene.

Irving-Specific Response

Our team is based in the DFW area and prioritizes Irving service calls - meaning shorter lead times, faster same-day availability, and technicians familiar with local property types and soil conditions.

Residential & Commercial Coverage

We service single-family driveways, HOA entry gates, apartment communities, and commercial facilities throughout Irving with equal depth of expertise and documentation.

Transparent Pricing, No Surprises

Every estimate is written and itemized before work begins. If scope changes on-site, we stop, explain, and get your approval - your budget is treated with the same precision as your gate.

What Keene Customers Say

Trusted by homeowners across Keene and surrounding areas.

★★★★★

"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."

Yusuf Aziz
★★★★★

"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."

Jessica Lin
★★★★★

"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."

Brianna Jackson

How It Works in Keene

Getting your gate motor & opener handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate motor & opener needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Keene - typically within 30–60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

Ready for Gate Motor & Opener in Keene?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Keene.

(855) 914-8517

Request a Free Estimate in Keene

Tell us about your gate motor & opener needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Areas We Serve
Call Now - 24/7 Dispatch