Gate Parts & Welding in Azle, TX | Everest Gate Repair Service Dallas Fort Worth

Gate Parts & Welding in Azle - Welded and Fitted, Priced Up Front

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Up to 11
Years Technician Experience
707+
5-Star Reviews
Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Fast, Reliable Gate Parts & Welding Across Azle

Gate parts and welding in Azle, TX typically runs $180–$650 depending on whether you’re fixing a hinge, replacing a heaved post, or fabricating custom steel components. Call (855) 914-8517 for a free estimate.

Professional welding steel gate parts with MIG welder in workshop in Azle, TX

Call (855) 914-8517

We’ve been driving out to Azle from our Irving base for eleven years now, and we know the difference between a quick Fort Worth suburb fix and the real work this town demands. Out here past Eagle Mountain Lake, you’re dealing with 16-foot steel tube ranch gates on caliche driveways, legacy one-piece doors from the 1970s with springs nobody stocks anymore, and posts that tilt like drunk fence pickets every time the Cross Timbers clay goes from soaked to baked. That’s why our Gate Parts & Welding team carries a mobile welder, a full inventory of hinge and latch hardware, and the patience to dig out a post that’s been set in hardpan for forty years.

Why Everest Gate Repair Service Dallas Fort Worth Is Azle’s Preferred Gate Parts & Welding Company

707 reviews averaging 4.8 stars tells part of the story.

Azle customers call us back because we don’t quote a full gate replacement when a post reset and hinge upgrade will solve it. Last spring, we replaced a seized Viking actuator on a 16-foot steel tube swing gate off Bonds Ranch Road where the original manual-construction post had heaved in Cross Timbers clay. We re-set the post in caliche hardpan, installed a new Ghost Controls opener, and upgraded the hinge mounts to handle the torque - avoiding a full gate replacement that would have run the owner thousands.

Our response time to Azle averages same-day or next-day for standard calls, and we prioritize emergency latch failures or post collapses that leave your property unsecured. We know the ZIP codes - 76020 and 76098 - and we know which side of town still runs agricultural pipe gates on T-brace corners versus the newer subdivisions pushing west from Fort Worth.

Our Gate Parts & Welding Services in Azle

Hinge Replacement

Heavy steel tube gates on Azle acreages destroy hinges. The original weld-on barrel hinges from a 1980s installation weren’t built for the torque of a modern automatic opener, and once they elongate, your gate starts sagging toward the caliche. We remove the old hinge, fabricate a reinforced mount if the gate frame is cracked, and install heavy-duty adjustable hinges rated for the actual weight of your gate. A typical hinge replacement in Azle runs $180–$320.

Hinge Replacement

Post Replacement

This is where Azle’s clay soil earns its reputation. That Blackland-adjacent expansive clay swells when wet - think spring storms rolling off Eagle Mountain Lake - and shrinks hard as concrete in August, tilting posts until your swing gate misses the latch by six inches. We dig out the old post, set a new steel or treated wood post in concrete below the frost line, and realign the entire gate system. Post replacement in Azle typically costs $350–$650 depending on depth, caliche density, and whether we’re resetting a T-brace agricultural corner or a standard end post.

Post Replacement

Rail Repair

Steel tube gates on Azle’s long driveways take abuse from livestock, ATVs, and the occasional delivery truck that misjudges the turn. We straighten bent rails, splice cracked sections with fish-plate welding, and reinforce stress points before they fail completely. For wooden privacy gates common in the 76098 subdivisions, we replace warped boards and re-secure the steel frame underneath.

Rail Repair

Custom Welding

Not every Azle gate matches a catalog. The agricultural pipe gates on the Parker County side, the ornamental steel driveway gates near the lake, the custom fabrications on 5-acre horse properties - we weld on-site. Dennis brings the portable MIG rig, cuts and shapes steel to match existing geometry, and finishes welds that hold up to North Texas temperature swings. Custom welding jobs in Azle start around $250 for basic repairs and run to $600+ for extensive frame reconstruction.

Assortment of metal gate hinges, latches, and repair tools on a workbench in Azle, TX
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 914-8517

Trusted Brands We Service in Azle

Your brand, our expertise. We stock and source parts for FAAC, BFT, Linear, Viking, and five other major operators - which means when your Azle gate fails, we’re not guessing at compatibility or ordering the wrong board and making you wait another week. We carry common FAAC and BFT control boards, Linear actuator assemblies, and Viking gear sets in our service inventory, and our relationships with distributors get us next-day parts for anything we don’t have on hand. That matters when you’re on a Parker County acreage and your gate won’t close at 6 PM.

Common Gate Parts & Welding Problems We See in Azle Homes

  • Legacy spring failures on 1970s one-piece doors. These original springs snap without warning, leaving the gate sagging and dangerous. The springs are discontinued, so we source compatible replacements or custom-fabricate tension solutions from modern hardware.
  • Expansive clay tilting posts seasonally. After heavy spring rain, your swing gate won’t latch because the post has shifted half an inch. We see this constantly in 76020 west of town, and the fix is either post reset or adjustable hinge upgrade.
  • Freeze damage to plastic operator components. North Texas freezing rain coats tracks and gears with ice that cracks housings on older FAAC and BFT models. We replace with cold-rated components and can add protective enclosures.
  • Torque overload on retrofitted manual gates. That heavy agricultural pipe gate was never meant for a linear actuator. The motor strains, hinges elongate, and the post leans - we reinforce the entire system or recommend a gate better suited to automation.

Pricing for Gate Parts & Welding in Azle, TX

Service Typical Range in Azle
Hinge Replacement (single) $180 – $320
Post Replacement (standard depth) $350 – $650
Rail Repair / Straightening $200 – $450
Custom Welding (basic to extensive) $250 – $600+
Latch & Lock Replacement $150 – $280
Emergency Service Call (after hours) $195 – $250

What moves you up or down in these ranges? Caliche depth for post work - we hit rock sometimes and need a breaker. Gate weight and material thickness for welding - quarter-inch steel tube takes more time and rod than thin ornamental stock. And accessibility: a gate at the end of a half-mile caliche driveway off Briar Road takes longer to reach than one on Azle Avenue. We quote upfront before starting work, and estimates are free. Call (855) 914-8517.

We Also Serve Cities Near Azle

We regularly run gate parts and welding calls to Eagle Mountain, Briar, River Oaks, and Saginaw - same-day response for most, same expertise from Dennis and the local pro. If you’re on the edge of our service radius, call and we’ll confirm timing.

Serving Azle, TX - Our Local Coverage Area

We’re serving the Azle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs - Gate Parts & Welding in Azle

Why Azle Chooses Everest Gate Repair Service Dallas Fort Worth

We set the standard for gate parts & welding in Azle.

Irving-Specific Response

Our team is based in the DFW area and prioritizes Irving service calls - meaning shorter lead times, faster same-day availability, and technicians familiar with local property types and soil conditions.

Residential & Commercial Coverage

We service single-family driveways, HOA entry gates, apartment communities, and commercial facilities throughout Irving with equal depth of expertise and documentation.

Transparent Pricing, No Surprises

Every estimate is written and itemized before work begins. If scope changes on-site, we stop, explain, and get your approval - your budget is treated with the same precision as your gate.

What Azle Customers Say

Trusted by homeowners across Azle and surrounding areas.

★★★★★

"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."

Yusuf Aziz
★★★★★

"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."

Jessica Lin
★★★★★

"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."

Brianna Jackson

How It Works in Azle

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Azle - typically within 30–60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

Ready for Gate Parts & Welding in Azle?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Azle.

(855) 914-8517

Request a Free Estimate in Azle

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Areas We Serve
Call Now - 24/7 Dispatch