Fast, Reliable Gate Parts & Welding Across Benbrook
Gate parts and welding in Benbrook typically run $180–$650 depending on whether we’re replacing a single hinge or fabricating structural repairs on a ranch gate, and most jobs are completed same-day. We’re usually on-site in Benbrook within 90 minutes from our Irving base, which matters when you’re dealing with a gate that’s stuck open or a post that’s heaved completely out of plumb after the last rain.
Benbrook’s not like other Fort Worth suburbs. One morning we’re realigning a residential privacy gate off Winscott Road, and by afternoon we’re welding a broken pipe-and-panel farm gate on a horse property near Benbrook Lake. That dual demand — standard suburban automated gates alongside working ranch gates — is virtually unique in DFW, and it takes a technician who’s actually worked here, not someone reading from a generic manual. Dennis and our Gate Parts & Welding team carry the parts, welding gear, and brand-specific knowledge to handle both in a single trip. Call (855) 914-8517 for a free estimate.
Why Everest Gate Repair Service Dallas Fort Worth Is Benbrook’s Preferred Gate Parts & Welding Company
We’ve been driving to Benbrook for 11 years — long enough to know which intersections flood, which lots have the worst clay heave, and which neighborhoods near the lake need stainless hardware by default. Dennis Price still leads every job personally, so the person diagnosing your gate is the same person with the authority to fabricate a custom bracket or weld a cracked rail on the spot.
Our 707 verified reviews average 4.8 stars, and plenty come from Benbrook homeowners who found us after a general handyman couldn’t source the right part or didn’t have welding capability. They mention the same things: we showed up when promised, we had the part, we didn’t need a return trip.
Response time to Benbrook averages under 90 minutes during business hours. For emergency calls — a gate stuck open overnight, a post snapped after a storm — we prioritize Benbrook’s perimeter neighborhoods and lake-area properties where security exposure is highest.
We also know the local building patterns. Benbrook’s 1970s–1990s ranch homes on oversized lots mean full driveway gates are common, and those original timber posts are hitting end-of-life simultaneously. We keep pressure-treated 6x6s and steel post sleeves stocked specifically for this recurring Benbrook repair type.
Our Gate Parts & Welding Services in Benbrook
Hinge Replacement
Benbrook’s black clay soil doesn’t just move posts — it torques gate frames until hinges bind, squeal, or shear completely. We replace standard residential hinges and heavy-duty ranch-gate pivot hinges, and we keep stainless-steel options for properties near Benbrook Lake where humidity pitting destroys standard hardware a full replacement cycle early. A typical hinge replacement in Benbrook runs $180–$320 for residential gates, $340–$480 for heavier ornamental or ranch gates.
Post Replacement
This is our most frequent Benbrook call. The expansive clay swells after rain, shrinks and cracks in August drought, and gradually pushes posts out of plumb until gates drag, bind, or won’t latch. We don’t just reset posts — we pour deeper footings with expanded-base concrete piers that resist heave better than the original construction. For rotted timber posts common to Benbrook’s older housing stock, we replace with pressure-treated 6×6 or steel I-posts depending on gate weight. Post replacement in Benbrook typically costs $380–$650 including footing work.
Rail Repair & Custom Welding
Pipe-and-panel farm gates take abuse from livestock, equipment, and the simple leverage of a 16-foot span sagging under its own weight. We bring a portable MIG rig to the job and weld cracked rails, fabricate replacement pickets, or build entirely new gate sections from steel tubing. For ornamental iron gates in the lake-area neighborhoods, we match existing scrollwork and weld rather than replace whenever possible. Custom welding and rail repair in Benbrook generally runs $280–$580 for on-site fabrication, with complex ornamental matching toward the higher end.
Gate Rollers, Latches & Locks
Sliding gates along Chapin Road and Winscott Road properties often suffer roller collapse from debris in the track or bearing seizure from neglected lubrication. We stock heavy-duty V-groove and cantilever rollers rated for Benbrook’s heavier residential gates. For latches and locks, we upgrade to marine-grade hardware near the lake and carry electronic strike plates compatible with LiftMaster, FAAC, and Elite access systems. Roller replacement runs $220–$380; latch and lock upgrades range $160–$340 depending on mechanical or electronic configuration.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Benbrook
Your brand, our expertise — that’s the point. We maintain parts inventory and factory-level familiarity with nine major operators: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Benbrook customers, this means same-day repair on common failures rather than a two-week wait for special-order parts. We see a lot of LiftMaster and Elite systems in the lake-area automated gates, and Mighty Mule on smaller residential properties off I-20. FAAC’s commercial-grade hydraulics show up on some of the larger equestrian facilities. We don’t guess — we diagnose by brand, stock the components, and fix it without trial-and-error ordering.
Common Gate Parts & Welding Problems We See in Benbrook Homes
- Posts heave and tilt seasonally. Benbrook’s black clay soil swells after spring rains and shrinks through summer drought, pushing gate posts out of plumb and misaligning the entire frame. We see this repeatedly in the 76132 ZIP, especially on older properties with original timber posts set in shallow footings.
- Operator housings crack in ice storms. North Texas winter ice isn’t frequent, but when it hits, exposed swing-gate operators — particularly on elevated properties near Benbrook Lake — freeze and split housings or shear mounting bolts. We replace housings and upgrade to cold-weather-rated hardware where exposure is unavoidable.
- Lake-humidity rust destroys hinge pins early. The localized humidity differential near Benbrook Lake visibly accelerates corrosion. We’ve replaced hinge pins on 8-year-old lake-area gates that looked 20 years old, while identical hardware a mile inland showed minimal pitting.
- Ranch gates sag and crack at weld points. The pipe-and-panel gates common to Benbrook’s horse properties flex under load and eventually crack at rail-to-post welds. We grind, re-gap, and re-weld with reinforcement gussets that outlast the original factory joints.
Pricing for Gate Parts & Welding in Benbrook, TX
| Service | Typical Range in Benbrook |
|---|---|
| Hinge replacement (residential) | $180 – $320 |
| Hinge replacement (heavy/ranch) | $340 – $480 |
| Post replacement with footing | $380 – $650 |
| Rail repair / custom welding | $280 – $580 |
| Gate roller replacement | $220 – $380 |
| Latch / lock upgrade | $160 – $340 |
What moves you within these ranges? Gate weight and material (wrought iron costs more to weld than steel tube), soil condition for post work (clay heave often requires deeper excavation), and whether we’re matching existing ornamental details versus straightforward functional repair. We don’t quote over email without seeing the gate — every Benbrook property’s soil and exposure is slightly different. Call (855) 914-8517 for a free on-site estimate with exact pricing.
We Also Serve Cities Near Benbrook
Our service radius covers the full southwest Fort Worth corridor. We regularly handle gate parts and welding in White Settlement for residential communities near Lockheed, Crowley for newer developments with automated entry systems, River Oaks for older gates needing post replacement, and throughout Fort Worth proper for commercial and HOA properties. Same-day response extends to all four cities during normal business hours.
Serving Benbrook, TX — Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Parts & Welding in Benbrook
Benbrook’s expansive black clay soil swells when wet and shrinks during drought, exerting cyclical pressure that pushes posts out of plumb. The original footings on most 1970s–1990s homes weren’t poured deep enough to resist this movement. We replace with expanded-base concrete piers set below the active soil zone, which stabilizes posts against seasonal heave. Call (855) 914-8517 and we’ll assess whether your posts can be reset or need full replacement.
Yes — the localized humidity near the lake accelerates rust pitting on standard steel hinge pins and latches by a full replacement cycle. We upgrade lake-area properties to stainless-steel pivot hinges and marine-grade latches. Near Benbrook Lake, we replaced a rusted hinge pin and latch on a 12-foot wrought-iron driveway gate that had seized from lake-humidity corrosion. The homeowner had originally used standard hardware, but we upgraded to stainless-steel pivot hinges to match the heavier gate weight and local conditions.
Yes — we service LiftMaster, Elite, Mighty Mule, and six other brands. Ice storm damage typically splits the operator housing or shears mounting hardware on exposed swing gates. We stock replacement housings and upgraded cold-weather mounting kits, and we can usually source same-day if your specific model isn’t in the van. Call (855) 914-8517 to describe the damage and we’ll confirm parts availability before dispatching.
Pipe-and-panel steel gates with welded rail construction handle livestock pressure and equipment contact better than ornamental iron or aluminum. We recommend 2⅜-inch or 2⅞-inch schedule-40 pipe with welded corner gussets, set on steel I-posts with concrete footings deep enough for Benbrook’s clay soil. For automated entry, we pair with a properly spec’d operator — usually a commercial-grade unit from LiftMaster or FAAC — rather than undersizing the motor. Dennis can evaluate your driveway grade and gate width on-site.
A rotted timber post replacement in Benbrook typically runs $380–$650, including removal, deeper footing excavation to counter clay heave, and installation of pressure-treated 6×6 or steel replacement post. If the gate frame has shifted significantly, we may need to realign hinges or weld adjustments, which adds $120–$240. Estimates are free — call (855) 914-8517 for exact pricing at your property.
Ready to get your gate working right? Whether it’s a heaved post off Winscott Road, a rusted hinge near Benbrook Lake, or a cracked rail on a working ranch gate, Dennis and our team bring the parts, welding equipment, and 11 years of gate-specific experience to fix it in one trip. No handyman guesswork. No waiting on parts orders. Call (855) 914-8517 now for a free estimate — we’re usually in Benbrook within 90 minutes.
Written by Dennis Price, Owner at Everest Gate Repair Service Dallas Fort Worth, serving Benbrook and the DFW area since 2014.