Fast, Reliable Gate Parts & Welding Across Haltom City
Gate parts and welding repair in Haltom City typically runs $180–$650 depending on whether you’re dealing with a sagging residential hinge or a full commercial slide gate rebuild, and most jobs are completed same-day. We’re Dennis Price and the team at Everest Gate Repair Service Dallas Fort Worth, and we make the drive up from Irving to Haltom City regularly—usually within 45 minutes for calls along Denton Highway or near the Airport Freeway interchange. Our Gate Parts & Welding crew carries the steel stock, welding equipment, and replacement hardware to fix your gate in one trip, not two. Call (855) 914-8517 for a free estimate.
Why Everest Gate Repair Service Dallas Fort Worth Is Haltom City’s Preferred Gate Parts & Welding Company
Eleven years, one specialty. That’s what separates us from the handyman who’ll “take a look at your gate too.” Dennis Price shows up as the lead technician on every Haltom City job—no subcontractors learning your system on your dime. Our 707 verified reviews average 4.8 stars, and plenty come from folks right here in the 76117 ZIP code who needed a gate post re-set in black clay or a commercial slide gate motor swapped out fast.
We know Haltom City’s rhythm. The post-WWII ranch homes off Belknap Street and Carson Street with their original chain-link gates. The light-industrial bays along Denton Highway where a new tenant inherits a mismatched gate system from the last guy. The detached workshops behind homes near Beach Street where a heavy-duty opener’s working overtime. That local fluency means we diagnose faster and carry the right parts—hinges, rollers, motors, steel stock—so we’re not making a second trip because we guessed wrong.
Our response time to Haltom City averages under an hour for standard calls, and we’re structured for same-day welding and parts replacement when the job can’t wait. Dennis and his team are factory-trained or experienced across nine gate operator brands, so your existing LiftMaster, Elite, or Mighty Mule system gets same-brand service, not a forced upgrade to whatever we happen to stock.
Our Gate Parts & Welding Services in Haltom City
Hinge Replacement
Haltom City’s clay soil doesn’t forgive weak hardware. We replace rusted, cracked, or binding hinges on residential swing gates from the 1950s–1970s housing stock and on heavier commercial gates near the industrial corridor. A typical hinge replacement in Haltom City runs $180–$320. We weld new hinge plates when the old mounting surface is too corroded for bolt-on replacement—common on gates that have been sagging for years along Carson Street and Belknap Street properties.
Post Replacement
This is our most frequent Haltom City call, and for good reason. Decades-old gate posts set in minimal concrete heave relentlessly in Tarrant County’s shrink-swell clay. Summer drought cracks the ground and sinks posts; spring rains push them outward and off-plumb. We pull the old post, auger deeper, and set a new steel or treated-wood post in a concrete footing engineered for clay soil movement. Post replacement in Haltom City typically costs $350–$650. On a ranch home near the Denton Highway corridor, our crew replaced a sagging 12-foot heavy-duty slide gate with a new LiftMaster motor and custom welded steel frame, securing the posts in deep concrete to counter the black-clay soil’s seasonal heave.
Rail Repair
Bent or separated top and bottom rails plague gates that have taken a hit from a delivery truck or simply sagged until the frame torqued. We straighten steel rails when possible and splice or replace them when the damage is too severe. Rail repair in Haltom City runs $220–$480. Properties near the Airport Freeway with commercial slide gates see more rail damage from high-cycle use and occasional impact—we address the rail and check whether the track and rollers contributed to the failure.
Custom Welding
Our in-house welding capability is what keeps Haltom City commercial tenants from waiting a week for an outside metal shop. We fabricate gate frames, repair cracked welds on existing steel structures, and build custom brackets for unusual installations. Custom welding jobs in Haltom City start around $280 for basic frame repair and run to $650+ for full gate section fabrication. The industrial belt along Denton Highway and Airport Freeway sees frequent tenant turnover in light-industrial spaces, leaving behind undersized chain-drive slide gate motors and lightweight track that must be fully replaced rather than adjusted—we weld the new frame and install matched hardware in one visit.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haltom City
Your brand, our expertise. We stock and service parts for LiftMaster, Elite, Mighty Mule, FAAC, and five other major operators, so Haltom City customers don’t get talked into replacing a perfectly good gate motor just because their previous technician only carried one brand. We keep common hinges, rollers, latches, and control boards on our trucks, and our welding gear means we’re not ordering a custom bracket and coming back next week. For commercial properties near TX-377 and TX-121, that parts availability translates to gates that stay secured and operational without the downtime that costs businesses money.
Common Gate Parts & Welding Problems We See in Haltom City Homes
- Gate posts heaving in shrink-swell clay. Decades-old posts set in minimal concrete tilt, twist, and eventually crack their welds. The gate binds, the latch won’t catch, and the frame stresses until something breaks. We see this constantly in the post-WWII ranch neighborhoods where original posts were never set deep enough for North Texas soil.
- Commercial slide gates mismatched after tenant turnover. A new business moves into a bay off Denton Highway and inherits a chain-drive slide gate with an undersized motor and lightweight track installed by the previous tenant. The gate stutters, skips, or fails entirely. Adjustment won’t fix fundamentally mismatched hardware—replacement is the only reliable path.
- Weld fractures from seasonal frame stress. Haltom City’s clay soil moves gates fractionally but relentlessly. Welds that looked solid in October crack by March as the frame torques. We cut out the failed weld, re-fit the joint, and lay a stronger bead with proper penetration.
- Detached workshop gates with heavy-duty wear. Self-reliant Haltom City homeowners with shop buildings run oversized doors on heavy-duty openers, and the springs, rollers, and hinges wear faster than standard residential hardware. We upgrade to high-cycle components and reinforce the frame where the extra weight concentrates stress.
Pricing for Gate Parts & Welding in Haltom City, TX
| Service | Typical Range in Haltom City |
|---|---|
| Hinge replacement (residential) | $180 – $320 |
| Hinge replacement (commercial/heavy-duty) | $280 – $450 |
| Post replacement (single, clay-soil depth) | $350 – $650 |
| Rail repair/straightening | $220 – $480 |
| Custom welding (frame repair) | $280 – $480 |
| Custom welding (full section fabrication) | $480 – $850+ |
| Emergency same-day service call | $150 – $200 (plus parts) |
What moves your job within these ranges? Gate size and weight, whether we can repair in place or need to remove the gate, steel type and thickness for welding work, and how deep we need to set posts to outlast Haltom City’s clay soil. We don’t quote blind over the phone for complex welding jobs, but we’ll give you an exact number after a free on-site assessment. Call (855) 914-8517 to schedule—estimates are free, and we carry the inventory to complete most Haltom City gate parts and welding jobs on the first visit.
We Also Serve Cities Near Haltom City
Our service radius covers the full northeast Tarrant County corridor. We regularly handle gate parts and welding calls in Richland Hills and Watauga for residential swing gate repairs, North Richland Hills for HOA entrance gate maintenance, and Fort Worth proper for larger commercial slide gate installations. Wherever you’re located, Dennis and his team bring the same stocked trucks and owner-operator accountability.
Serving Haltom City, TX — Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Parts & Welding in Haltom City
North Texas shrink-swell clay expands when wet and contracts dramatically in summer drought, exerting thousands of pounds of lateral pressure on gate posts. In Haltom City, many original posts from the 1950s–1970s housing stock were set in shallow concrete that can’t resist that cycle, so posts tilt, heave, or rotate until welds crack and gates bind. We replace them with deeper footings and proper drainage to break that cycle. Call (855) 914-8517 for a free post assessment.
We can usually repair it if the motor, track, and gate frame are properly matched, but Haltom City’s industrial belt sees too many mismatched systems where an undersized motor was paired with lightweight track on a heavy gate. When that’s the case, we recommend full motor and track replacement with a properly specced system—adjustment just delays the inevitable failure. Dennis Price evaluates the match on-site and gives you an honest call. Call (855) 914-8517 to schedule.
Yes, and it’s a significant part of our Haltom City work. Workshop gates often run heavier-duty openers and oversized doors that standard residential hardware can’t handle, so springs fatigue faster and rollers flatten. We upgrade to high-cycle hinges, rollers, and openers rated for the actual weight and cycle count, and we weld frame reinforcements where the stress concentrates. Call (855) 914-8517 to discuss your workshop gate.
We perform MIG and stick welding on steel gate frames, fabricating custom brackets, repairing cracked welds, and building replacement gate sections in the field. For Haltom City commercial properties, that means no waiting for an outside metal shop—we cut, fit, and weld on-site, then test the gate operation before we leave. Call (855) 914-8517 for a welding estimate.
If the gate sags consistently after adjustment, if hinges are cracked, corroded through, or have elongated bolt holes, replacement is the right call. In Haltom City, we often find that “adjustment” requests are really hinge failure masked by clay-soil post movement—the hinge isn’t the root cause, but it’s damaged enough that adjusting alone won’t hold. Dennis Price checks the full system to determine whether hinges, posts, or both need attention. Call (855) 914-8517 for an exact diagnosis.
Ready to get your Haltom City gate fixed right in one trip? Dennis Price and the Everest Gate Repair Service Dallas Fort Worth team are standing by. Whether it’s a heaving post in black clay, a weld cracked from seasonal stress, or a commercial slide gate that needs complete hardware replacement, we bring the parts, the welding gear, and the eleven years of gate-only experience to solve it on-site. Call (855) 914-8517 now for your free estimate—most Haltom City gate parts and welding jobs are completed same day.
Written by Dennis Price, Owner at Everest Gate Repair Service Dallas Fort Worth, serving Haltom City since 2013.