Gate Parts & Welding in Keene, TX | Everest Gate Repair Service Dallas Fort Worth

Gate Parts & Welding in Keene - Welded and Fitted, Priced Up Front

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Up to 11
Years Technician Experience
707+
5-Star Reviews
Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Fast, Reliable Gate Parts & Welding Across Keene

Gate parts and welding repair in Keene typically runs $180–$650 depending on whether you’re fixing a single hinge or replacing a full post-and-pier assembly, and most jobs completed same-day or next-day. We’re familiar with Keene’s 76059 properties - from the modest ranch homes near Southwestern Adventist University to the acreage lots along Hill College Drive - and we understand why your gate is failing before we even pull up. Call (855) 914-8517 for a free estimate.

Professional welding steel gate parts with MIG welder in workshop in Keene, TX

Call (855) 914-8517

Keene’s semi-rural character means most properties here rely on driveway pipe gates, wooden ranch-style gates, and basic ornamental iron rather than high-end automated systems. That older hardware has endured decades of North-Central Texas heat and Johnson County’s infamous black clay soil. When a hinge seizes or a post leans, you need someone who can fabricate parts on-site rather than order from a catalog and hope. Our Gate Parts & Welding team carries the welder, the stock steel, and the brand-specific knowledge to fix it where it stands.

Why Everest Gate Repair Service Dallas Fort Worth Is Keene’s Preferred Gate Parts & Welding Company

We’ve been driving to Keene from our Irving base for 11 years, and the pattern is unmistakable: the gate itself is rarely the real problem. The post is leaning. The clay won.

Our 707 reviews average 4.8 stars, and that volume matters. It reflects thousands of completed jobs, not a handful of testimonials. Keene customers specifically mention our willingness to explain why their post failed and how deep the new pier needs to go. We’re not the cheapest bid you’ll find, but we’re the one that doesn’t come back next spring with the same lean.

Response time to Keene is typically same-day or next-day for welding and parts calls. We keep common hinges, rollers, and latch hardware in stock, plus steel stock for custom fabrication. For automated gates, we carry parts for nine major brands - so your existing FAAC, LiftMaster, or Elite operator doesn’t get ripped out and replaced with whatever was on hand.

That local soil knowledge saves Keene property owners from repeated post replacements. We quote footing depth before we quote anything else.

Our Gate Parts & Welding Services in Keene

Hinge Replacement

Keene’s alternating wet springs and parched summers create aggressive shrink-swell cycles that stress every weld point. Hinges on older wooden ranch gates and ornamental iron systems crack at the weld, seize from rust, or elongate their bolt holes until the gate sags and drags. A typical hinge replacement in Keene runs $180–$320 for standard residential hardware, including removal of the rusted assembly and welding in a new, properly aligned hinge plate. On properties near Woodland Crescent or along the older stretches of Hill College Drive, we regularly encounter original 1980s hinges that have lost their pin tolerance - we replace with greasable, heavy-duty hinges that survive the clay movement.

Hinge Replacement

Post Replacement

This is the big one in Keene. Blackland Prairie clay soil expands and contracts so aggressively that gate posts set without at least 48-inch-deep concrete piers can visibly lean within two growing seasons, a failure pattern far more extreme than in the sandy soil communities just west of Johnson County. Post replacement in Keene typically costs $450–$650 including the reinforced pier, proper drainage backfill, and rehang of the existing gate. We use 48-inch minimum depth with rebar reinforcement, and we angle the concrete bell to resist uplift. On Keene’s acreage lots, this is non-negotiable. We’ve seen “repaired” posts from other contractors lean again in 18 months because they skimped on depth. Dennis won’t spec a post replacement without proper footing - it’s why our Keene customers don’t call us twice for the same post.

Post Replacement

Rail Repair

Bent or broken gate rails from vehicle contact, fallen limbs, or decades of gravity loading are common on Keene’s older pipe gates and ranch-style entrances. Rail repair runs $220–$400 depending on whether we’re straightening and re-welding existing stock or cutting and splicing new steel. The summer heat exceeding 100°F warps untreated wooden top rails on older gates; we often replace with steel box tubing or treated dimensional lumber that won’t twist. For ornamental iron gates in Keene, we match existing profiles from our stock or fabricate custom sections in the field.

Rail Repair

Custom Welding

Not every Keene gate failure fits a catalog part. We weld, we wire, we repair - and the welding capability is what separates us from handymen who bolt on universal hardware. Custom welding in Keene ranges from $200 for simple hinge plate fabrication to $500+ for structural frame reinforcement or complete gate extension. On a 1980s ranch-style gate on Hill College Drive, the original FAAC operator had seized from decades of clay-heave misalignment. We replaced the twisted post with a 48-inch-deep reinforced pier, swapped in a new LiftMaster slide operator, and retrofitted the Woodland Crescent home’s original weld with a rust-resistant hinge plate. That’s the kind of integrated repair Keene properties need - not a band-aid on symptoms, but fixing the root cause and the damage it caused.

Assortment of metal gate hinges, latches, and repair tools on a workbench in Keene, TX
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 914-8517

Trusted Brands We Service in Keene

Your brand, our expertise. We stock and service parts for LiftMaster, FAAC, Elite, and Mighty Mule operators commonly found on Keene automated gates, plus five additional major brands. Most Keene properties with automation run mid-tier residential openers from the 2000s–2010s - we carry replacement gears, limit switches, and control boards for these units, avoiding the “replace the whole operator” upsell when a $40 part solves it. For properties near Southwestern Adventist University or the newer construction on Keene’s eastern edge, we also support BFT, Linear, Viking, Ghost Controls, and DoorKing systems. Our parts inventory and brand fluency mean faster turnaround for Keene customers - no waiting on a distributor to guess which board you need.

Common Gate Parts & Welding Problems We See in Keene Homes

  • Post lean from shallow footings in expansive clay. Keene’s black clay swells when wet and shrinks when dry, exerting thousands of pounds of lateral force on gate posts. Posts set at 24 inches - standard in sandy soils - lean visibly within two to three seasons. The gate drags, the opener strains, and eventually the motor fails. We fix the pier first, then the gate.
  • Weld cracks at hinge points from seasonal heave-and-settle cycles. After freeze-thaw winters like the ice storms that hit the DFW corridor every few years, Keene gates develop fresh cracks at stress-concentrated welds. These aren’t cosmetic - they propagate until the hinge separates. We grind, prep, and re-weld with proper penetration, often adding gusset plates for reinforcement.
  • Original 1970s–1990s spring assemblies that have lost temper. Decades of 100°F+ DFW summers anneal torsion and extension springs, reducing their stored energy. A gate that once swung smoothly now feels heavy or slams shut. We replace with correctly specced springs - not stronger “to be safe,” but matched to the gate weight and geometry.
  • Rusted latch and lock hardware from humidity swings. Keene’s humidity spikes in spring and crashes in August, accelerating corrosion on unpainted iron hardware. Latches stick, lock cylinders seize, and electric strikes fail to release. We fabricate or source replacement hardware, often upgrading to stainless or zinc-plated components.

Pricing for Gate Parts & Welding in Keene, TX

Service Typical Range in Keene
Hinge replacement (single) $180–$320
Post replacement with 48″ pier $450–$650
Rail repair / straightening $220–$400
Custom welding (field fabrication) $200–$500+
Gate roller replacement (set) $160–$280
Latch / lock replacement $140–$260

What moves you within these ranges? Gate size and weight, material type (steel vs. aluminum vs. wood), accessibility for our welding rig, and whether the failure is isolated or symptomatic of deeper problems like post lean. A hinge replacement on a plumb post is straightforward. A hinge replacement on a leaning post means fixing the pier first - or the new hinge tears out in a year. We diagnose on-site, explain what we see, and give you an upfront number before we strike an arc. Estimates are free. Call (855) 914-8517 to schedule.

We Also Serve Cities Near Keene

Our welding rig and parts inventory cover Johnson County and southern Tarrant County regularly. We serve Joshua to the east, Burleson to the northeast, Crowley to the north, and EvermanIf you’re on an acreage lot or managing an HOA entrance in any of these communities, the same clay-soil expertise and brand-specific parts capability apply.

Serving Keene, TX - Our Local Coverage Area

We’re serving the Keene area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs - Gate Parts & Welding in Keene

Why Keene Chooses Everest Gate Repair Service Dallas Fort Worth

We set the standard for gate parts & welding in Keene.

Irving-Specific Response

Our team is based in the DFW area and prioritizes Irving service calls - meaning shorter lead times, faster same-day availability, and technicians familiar with local property types and soil conditions.

Residential & Commercial Coverage

We service single-family driveways, HOA entry gates, apartment communities, and commercial facilities throughout Irving with equal depth of expertise and documentation.

Transparent Pricing, No Surprises

Every estimate is written and itemized before work begins. If scope changes on-site, we stop, explain, and get your approval - your budget is treated with the same precision as your gate.

What Keene Customers Say

Trusted by homeowners across Keene and surrounding areas.

★★★★★

"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."

Yusuf Aziz
★★★★★

"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."

Jessica Lin
★★★★★

"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."

Brianna Jackson

How It Works in Keene

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Keene - typically within 30–60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

Ready for Gate Parts & Welding in Keene?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Keene.

(855) 914-8517

Request a Free Estimate in Keene

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Areas We Serve
Call Now - 24/7 Dispatch