Fast, Reliable Gate Parts & Welding Across White Settlement
Gate parts and welding repair in White Settlement typically costs $180–$650 depending on whether you need hinge work, post reset, or full custom fabrication, and most jobs are completed same-day. We’re Everest Gate Repair Service Dallas Fort Worth, and our Gate Parts & Welding crew works White Settlement regularly — we know the 76116 ZIP, the post-WWII ranch neighborhoods, and the clay-soil headaches that come with them. Dennis Price and our team can usually be on-site in White Settlement within 90 minutes during business hours. Call (855) 914-8517 for a free estimate.
Why Everest Gate Repair Service Dallas Fort Worth Is White Settlement’s Preferred Gate Parts & Welding Company
We’ve been repairing gates in White Settlement long enough to recognize the same street names on repeat calls — Sylvania Avenue, Las Vegas Trail, the blocks tucked behind the NAS Fort Worth JRB perimeter. That repetition isn’t a complaint; it’s how you build real local knowledge. Our 707 verified reviews average 4.8 stars, and a solid chunk of those come from White Settlement homeowners who’ve watched us pull and reset leaning posts on their 1960s chain-link gates, then called us back two years later when the clay shifted again.
Dennis Price shows up as the lead technician, not a subcontractor learning your neighborhood on the fly. That matters in White Settlement, where a gate repair often requires on-the-spot decisions — weld this crack or replace the rail? Fabricate a latch or source a discontinued part? You want the person who can authorize the work standing in your driveway with a welder, not a phone tag chain back to an office.
Our response time to White Settlement averages under 90 minutes for standard calls, and we carry common hinge brackets, post anchors, and welding gear on every truck. No waiting for a parts run to Fort Worth while your gate hangs open.
Our Gate Parts & Welding Services in White Settlement
Hinge Replacement
Hinges on White Settlement’s older gates take a beating. The Fort Worth Prairie clay beneath your post swells in spring rains, shrinks in August drought, and slowly torques the hinge bracket out of true. By the time the gate is binding or squealing, the hinge bolt is often egg-shaped in its hole or the bracket itself is cracked at the weld. We stock galvanized and stainless steel hinge brackets sized for the 2-inch and 2-3/8-inch frames common on White Settlement’s vintage chain-link gates, and we weld reinforcements when the existing frame tube is too thin for a bolt-on replacement. A typical hinge replacement in White Settlement runs $180–$280.
Post Replacement
This is the big one in 76116. That expansive clay doesn’t forgive — a post set without proper drainage or depth will lean within a season. We’ve replaced posts on Cherry Lane, on the streets near Brewer High School, and throughout the JRB-adjacent blocks where the original 1950s wood posts have simply rotted through at the concrete line. We pull the old post, auger to 36 inches minimum (deeper if we hit that stubborn clay pan), set with crushed stone drainage, and weld your gate frame back to plumb. Wood post replacement in White Settlement typically runs $320–$480; steel post with full concrete footing runs $450–$650.
Rail Repair
The top and bottom rails on chain-link gates fatigue at the corners and hinge points. In White Settlement, we see this constantly on gates that have been sagging for years — the rail tube cracks at the weld, the gate drops, and the homeowner props it with a brick. We cut out the damaged section, sleeve or replace the rail, and weld it back to the frame with proper penetration so it doesn’t crack at the same stress point. Rail repair in White Settlement generally runs $220–$380 depending on how much of the frame needs attention.
Custom Welding
Here’s where we earn our keep in White Settlement. Those combination security setups — swing gate plus pedestrian man-gate — installed by defense-era homeowners near the JRB perimeter often run on latch hardware that’s been discontinued for thirty years. Big-box stores don’t stock it. We measure, fabricate from stainless or galvanized steel, and weld mounts that match the original bolt pattern. Same for hinge brackets on oddball frame sizes, gate-operator mounting plates that need modification, or reinforcing plates at fatigue cracks. Custom welding and fabrication in White Settlement starts at $250 and runs to $550 for complex multi-piece jobs.
Gate Rollers, Latch & Lock Hardware
Sliding gate rollers flat-spot or seize; slide bolts rust solid; keyed latches lose their tumblers. We carry replacement rollers for common track sizes and can fabricate mounting brackets when your frame doesn’t match modern standards. For the discontinued latches on those dual-gate setups near the base, we build replacements that function like the original — no drilling new holes in your masonry or wood post. Roller and latch work in White Settlement typically falls between $150–$320.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in White Settlement
Your brand, our expertise. We carry parts and perform welding repairs on gate operators from LiftMaster, DoorKing, Elite, and Mighty Mule — plus five additional major brands — which means we don’t guess at what’s compatible. For White Settlement customers, this translates to faster turnaround: we recognize your operator model, know whether the mounting bracket needs welding modification, and stock or source the correct components without trial-and-error ordering. Dennis has worked on Elite and Mighty Mule systems long enough to know which hinge points stress their actuator arms, and where a welded reinforcement prevents a repeat failure.
Common Gate Parts & Welding Problems We See in White Settlement Homes
- Clay soil heave tilts gate posts out of plumb. The Fort Worth Prairie’s high shrink-swell clay pushes posts 2–4 inches off vertical through a single wet-dry cycle, throwing hinges out of alignment and causing chronic binding that requires full post reset rather than simple adjustment.
- Fatigue cracks at welded joints on decades-old chain-link frames. The hinge-to-post connection is the highest-stress point; we see complete separations on 60-year-old gates that have been sagging until the weld finally gives out.
- Mismatched, discontinued latch hardware on dual-gate setups near the JRB perimeter. Defense-era combination swing/man-gate installations used latches no longer manufactured, forcing custom fabrication when originals corrode or break.
- Ice storm damage to wood frames and hardware. White Settlement’s periodic winter ice loads warp gates that were already stressed by summer sun, and the distortion rarely self-corrects — the gate binds worse each season until the frame or hinges fail.
Pricing for Gate Parts & Welding in White Settlement, TX
| Service | Typical Range in White Settlement |
|---|---|
| Hinge replacement (single) | $180 – $280 |
| Post replacement, wood | $320 – $480 |
| Post replacement, steel with concrete footing | $450 – $650 |
| Rail repair / frame welding | $220 – $380 |
| Custom welding / latch fabrication | $250 – $550 |
| Gate roller / latch & lock replacement | $150 – $320 |
What moves you within these ranges? Material type (galvanized steel costs more than standard steel but lasts longer in White Settlement’s clay-heavy, sometimes damp conditions), accessibility of the post or frame, and whether we’re matching existing hardware or building from scratch. We don’t quote over the phone for custom fabrication without photos or site visit — but we don’t charge for the estimate either. Call (855) 914-8517 and we’ll give you a firm number on-site.
We Also Serve Cities Near White Settlement
Our welding trucks cover Benbrook, River Oaks, Fort Worth, and Forest Hill with the same parts inventory and Dennis Price’s direct involvement. If you’re near the White Settlement city line on, say, the Las Vegas Trail corridor, you’re likely closer to our active route than you think — call and we’ll confirm timing.
Serving White Settlement, TX — Our Local Coverage Area
We’re based in the White Settlement area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Parts & Welding in White Settlement
Your posts are fighting the Fort Worth Prairie’s expansive clay soils, which swell when wet and shrink during drought, creating a cycle of ground movement that no hinge adjustment can compensate for. In White Settlement’s 1950s–1970s neighborhoods, many original posts were set too shallow or without proper drainage, making the problem worse. We address this with full post pull-and-reset to 36-inch depth, crushed stone drainage, and welded hinge brackets that tolerate minor movement without binding. Call (855) 914-8517 — estimates are free, and we’ll show you exactly what’s happening underground.
Yes, and we do this regularly for the dual-gate setups in the JRB-adjacent blocks where original latch hardware has been discontinued for decades. We fabricate custom stainless steel latches matched to your existing bolt pattern and post spacing, so you don’t need to drill new holes or replace the entire gate. The process takes about 90 minutes on-site. Call (855) 914-8517 to schedule — bring a photo if you can, but we can measure on arrival.
White Settlement follows Fort Worth’s building code for wind resistance, which requires exterior gates to withstand minimum design wind speeds — currently 115 mph for this region. If you’re replacing a gate or installing new, we weld frames and specify materials to meet or exceed that rating. For existing gates, we can assess whether your current frame and post anchoring would survive a severe storm, and reinforce weak points with welded gussets or upgraded hardware. Call (855) 914-8517 for a wind-load assessment — especially if your gate is already showing stress cracks.
A rotted wood post replacement in White Settlement typically runs $320–$480, including removal, augering, new post setting with proper drainage, and rehanging your gate with adjusted hinges. If the clay soil has caused significant tilting or the concrete footing has cracked, we may recommend upgrading to a steel post with deeper embedment, which runs $450–$650 but resists the next heave cycle far better. Call (855) 914-8517 for an exact quote — we bring the auger and welder, so most jobs finish in one visit.
We service and perform welding repairs on nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In White Settlement, we most commonly weld mounting brackets and actuator arms for LiftMaster, DoorKing, Elite, and Mighty Mule systems — especially when clay soil movement has stressed the operator attachment points. Our trucks carry common brackets for these brands, and Dennis Price can modify or fabricate mounts for non-standard installations. Call (855) 914-8517 with your model number; we’ll confirm parts and schedule.
Written by Dennis Price, Owner at Everest Gate Repair Service Dallas Fort Worth, serving White Settlement and the greater Fort Worth area since 2013.