Fast, Reliable Gate Repair Across Irving
Gate repair in Irving typically runs $180–$650 depending on whether you’re dealing with a sagging residential swing gate in south Irving or a high-cycle commercial slide gate on a Las Colinas corporate campus. Most calls in Irving are completed same-day, and we carry parts for nine major brands including FAAC, BFT, and Viking to avoid second trips.
We’re local to Irving — Dennis Price and our team respond directly to calls from Valley Ranch, Las Colinas, and the older neighborhoods off Belt Line Road and Story Road. After eleven years specializing exclusively in gates, we know the difference between a 1980s ornamental-iron gate retrofit in a south Irving tract home and a crash-barrier integrated system serving a Fortune 500 campus off MacArthur Boulevard. That matters because the parts, the codes, and the fix are completely different. Call us at (855) 914-8517 for a free estimate.
Why Everest Gate Repair Service Dallas Fort Worth Is Irving’s Preferred Gate Repair Company
Our Gate Repair team has built its reputation one Irving job at a time. Dennis Price shows up as lead technician — not a subcontractor learning on your gate — and that direct accountability shows in our 707 verified reviews averaging 4.8 stars. Customers in Valley Ranch and Las Colinas specifically mention our familiarity with HOA architectural requirements and our refusal to guess at brand-specific diagnostics.
We’re typically on-site in Irving within hours, not days, because we’re based here and carry inventory matched to the equipment we actually encounter: legacy LiftMaster chain-drives in the 1960s–80s neighborhoods, FAAC hydraulic operators on hotel properties, and DoorKing access-control networks in office parks off Highway 114. Eleven years, one specialty — and in Irving, that specialty includes both vintage residential gates and commercial-grade systems that general repair crews simply aren’t equipped to handle.
Our Gate Repair Services in Irving
Post Repair
Irving’s Blackland Prairie clay is brutal on gate posts. The soil swells when wet and shrinks dramatically during dry spells, which means posts heave seasonally and throw your entire gate out of square. In south Irving’s older neighborhoods and in The Bend at Las Colinas, we regularly find 4×4 or 6×6 posts that have shifted two to three inches off plumb, cracking concrete footings and stressing hinges beyond their design. We excavate, reset with proper drainage gravel, and pour new footings where the original install cut corners. A typical post repair in Irving runs $280–$520.
Weld Repair
We weld, we wire, we repair — and that fabrication capability matters in Irving more than most suburbs. After ice storms, which hit Irving harder than cities to the south, we see bent aluminum pedestrian gates and cracked ornamental-iron frames throughout Las Colinas and Valley Ranch. Our mobile welding rig lets us repair structural cracks on-site rather than hauling your gate to a separate metal shop. On a 1980s Valley Ranch home with an original ornamental-iron swing gate, we found the marginal suspension leaf hinge cracked from years of dried-out grease and unleveled post settling. We sourced an authentic replacement hinge matching the HOA’s original spec, realigned the post, and retrofitted a new GateKeeper photo-eye system — saving the homeowner a full gate replacement that would have required costly architectural review. Weld repair in Irving typically costs $180–$380 for residential gates, with commercial structural work quoted per job.
Gate Realignment
A gate that drags, binds, or won’t latch is almost always a geometry problem, and in Irving the geometry changes with the seasons. We measure frame square, check post plumb against current — not original — grade, and adjust hinge placement or add adjustable j-bolt hinges where the original hardware can’t compensate. In Valley Ranch and Las Colinas, HOAs often mandate that replacement gate panels and operators match the community’s original ornamental iron spec and finish exactly — technicians who skip checking the architectural review board requirements before ordering parts routinely have jobs rejected and must eat the cost of non-conforming hardware. We check first. Realignment service in Irving runs $150–$290 for standard residential swing gates.
Hinge Repair
Hinges on Irving gates fail predictably: south Irving’s older wood gates suffer from galvanized hinges that rust through after decades of clay-soil moisture exposure, while Las Colinas ornamental-iron gates see bearing wear from the weight of decorative scrollwork. We stock heavy-duty ball-bearing and greaseable hinge options sized to your gate’s actual weight, not whatever was cheapest at the hardware store. Hinge replacement in Irving costs $140–$260 per pair installed.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
Your brand, our expertise — that’s not a slogan, it’s how we avoid trial-and-error guessing on your equipment. Dennis and his team are factory-trained or field-experienced across nine gate operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Irving customers, this means we stock common failure parts locally — control boards for FAAC hydraulic operators on Las Colinas hotel properties, Viking gear assemblies for high-cycle commercial slide gates, Linear actuators common in Valley Ranch residential installs. We don’t order-and-hope. We diagnose by brand, fix by spec, and turn same-day repairs that keep your gate operational and your security intact.
Common Gate Repair Problems We See in Irving Homes
- Seasonal post heave from Blackland Prairie clay. Irving’s expansive soil swells and contracts with wet-dry cycles, causing gate posts to shift and throw hinges and latch strikes out of alignment. We see this every spring and late fall — it’s not your gate failing, it’s your dirt moving.
- Legacy LiftMaster chain-drive opener failures. In 1970s–80s south and west Irving neighborhoods, original chain-drive openers on one-piece or early sectional doors fail when brittle nylon gears strip or seized limit switches prevent proper travel. Parts availability for these legacy units is narrowing — we stock what we can and advise honestly when retrofit makes more sense than repair.
- Ice storm damage to aluminum pedestrian gates. After Saturday ice storms, aluminum pedestrian gates in The Bend at Las Colinas bend permanently under ice load or impact from falling branches. These require weld repair or full replacement — aluminum doesn’t spring back.
- HOA-mandated spec mismatches in planned communities. In Valley Ranch and Las Colinas residential enclaves, replacement hardware must match original ornamental iron specs and finishes exactly. We verify architectural review requirements before ordering to avoid costly rejections.
Pricing for Gate Repair in Irving, TX
Here’s what gate repair costs in Irving’s market — real numbers, not “call for pricing” deflection:
| Service | Typical Range in Irving |
|---|---|
| Hinge repair / replacement | $140 – $260 |
| Gate realignment | $150 – $290 |
| Weld repair (residential) | $180 – $380 |
| Post repair / reset | $280 – $520 |
| Gate motor / opener repair | $220 – $480 |
| Access control diagnostics & repair | $180 – $450 |
| Emergency / after-hours service | Standard rate + $85 |
Commercial-grade systems in Las Colinas — high-cycle slide gates, crash barriers, integrated access-control networks — are quoted per job based on equipment spec and cycle requirements. What drives cost up: extensive rust damage requiring structural welding, obsolete operators where parts must be sourced from secondary suppliers, or multiple post resets on clay-compromised footings. What keeps cost down: catching hinge wear before it cracks the frame, and seasonal adjustment before misalignment damages the operator. Estimates are free. Call (855) 914-8517 and we’ll give you an exact quote after seeing your gate.
We Also Serve Cities Near Irving
Our service radius extends naturally from our Irving base to neighboring communities with similar gate profiles: Farmers Branch with its mix of mid-century and newer residential gates, University Park and Highland Park with their ornamental-iron estate entrances and strict architectural standards, and Dallas proper with its full spectrum from residential to commercial and institutional systems. Same-day response, same Dennis Price-led service.
Serving Irving, TX — Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Repair in Irving
Yes — most Valley Ranch and Las Colinas HOAs require pre-approval for any visible gate hardware change, including operator replacement. We check your community’s architectural review board requirements before ordering parts, and we spec replacement operators that match the original mounting footprint and finish to avoid rejection. Call (855) 914-8517 and we’ll coordinate the paperwork with your HOA if needed.
High-cycle commercial slide gates in Las Colinas should be serviced every 6–12 months depending on daily cycle count — Fortune 500 campuses with 200+ daily cycles need quarterly inspection. We lubricate the chain or rack, check limit switch alignment, test safety edges and photo eyes, and inspect the operator’s gear assembly for wear before it fails during peak traffic. Call (855) 914-8517 to set up a maintenance schedule matched to your cycle volume.
Yes — we service FAAC hydraulic operators including legacy 1980s units, and we stock common FAAC control boards, hydraulic fluid, and seal kits. For obsolete components, we source from FAAC’s secondary parts network or advise when a modern retrofit offers better reliability and parts availability. Call (855) 914-8517 with your model number for a same-day diagnosis.
Sagging after a freeze usually means hinge pin wear combined with post settlement from clay heave — the hinge can’t support the gate’s weight, and the post has shifted off plumb. We inspect for cracked welds at the hinge-to-frame joint, measure post position against current grade, and either replace with heavy-duty adjustable hinges or reset the post with proper drainage. Most sagging gate repairs in south Irving run $180–$340. Call (855) 914-8517 for a free inspection.
Yes — DoorKing is one of the nine brands we support, and we regularly service DoorKing telephone entry systems, card readers, and loop detectors in Irving office parks along MacArthur Boulevard and Highway 114. We carry common DoorKing control boards and can integrate repairs with your existing access network without replacing the entire system. Call (855) 914-8517 for same-day service on DoorKing equipment.
Written by Dennis Price, Owner at Everest Gate Repair Service Dallas Fort Worth, serving Irving since 2013.