Fast, Reliable Gate Repair Across Keene
Gate repair in Keene, TX typically runs $180–$650 depending on the problem, and most calls are completed same-day. Dennis and our crew make the drive from Irving to Johnson County regularly — we know the back roads past Southwestern Adventist University and the acreage lots off Hill College Drive where a leaning gate post can ruin your whole morning.
We’re not dispatchers sitting in a call center. Dennis Price shows up with the welder, the diagnostic tools, and eleven years of gate-only experience. Whether you’ve got a 1970s ranch gate that’s binding against the frame or a modern automated system that quit responding, we handle the full scope — Gate Repair, installation, motor service, access control, and structural welding — without handing you off to subcontractors.
Call (855) 914-8517 for a free estimate. We stock parts for nine major brands and fabricate what we can’t source.
Why Everest Gate Repair Service Dallas Fort Worth Is Keene’s Preferred Gate Repair Company
Our reputation in Keene is built on showing up and staying until the root problem is fixed — not until the symptom is masked. We’ve earned 707 verified reviews averaging 4.8 stars, and a growing share of those come from Johnson County property owners who initially called us for a “simple hinge adjustment” and learned their post was heaving in black clay.
Dennis serves as lead technician on every job. You get the owner, not a trainee with a checklist. That matters on Keene’s older properties, where a gate installed in 1985 might have three different hardware eras layered into one frame, and where diagnosing the real failure — soil movement, not gate failure — saves you from paying twice.
Response time to Keene is typically same-day or next-morning. We route through Crowley and Burleson, so we’re not crossing the entire metroplex during rush. Our local knowledge extends to the specific hardware common in Keene’s housing stock: basic ornamental iron, pipe-style ranch gates, and the wooden driveway gates that swell and warp through North-Central Texas summers.
Our Gate Repair Services in Keene
Post Repair
This is the repair we perform most often in Keene, and it’s almost never the gate’s fault. Keene sits directly on Johnson County’s expansive black clay — Blackland Prairie soil — that swells and contracts dramatically through wet-dry cycles. Posts set without deep concrete piers below the active clay zone visibly lean within two to three seasons. We recently repaired a 1980s-era sliding gate on a 5-acre lot off Hill College Drive where the post had tilted 4 inches out of plumb due to clay heave. We re-set the post on a 4-foot concrete pier, replaced the rusted gate latch, and integrated a LiftMaster smart opener with the homeowner’s home automation system. That 4-foot depth isn’t arbitrary — it’s what keeps a Keene post stable when the clay beneath it moves.
Gate Realignment
A gate that’s dragging, binding, or refusing to latch is often a realignment issue triggered by post movement. In Keene, we see this pattern constantly: the gate worked fine in spring, but by late summer it’s scraping concrete. The frame hasn’t changed — the ground holding it has. We realign the gate to its corrected post position, then check every hinge mount and weld point for stress cracks caused by months of micro-movement. Realignment without addressing the footing depth is temporary. We quote the pier work upfront because we’ve watched too many Keene property owners pay for realignment twice.
Weld Repair
Our mobile welding rig lets us repair structural gate damage on-site rather than deferring to a separate metal shop. This matters on Keene’s acreage properties, where removing a gate for off-site repair means leaving a driveway unsecured. Rust accelerates on iron gates in humid North-Central Texas summers, especially at weld points and hinge mounts, leading to weld fatigue. We grind to clean metal, weld with matching rod, and finish with rust-inhibiting primer. For wooden gates with steel frames, we repair the metal substructure without disturbing the wood facing.
Hinge Repair
Brass and steel hinges bind up due to the micro-movement of frames on shifting posts — a Keene specialty. We replace worn hinges with heavy-duty equivalents, re-tap stripped mounting holes, and add backing plates where the wood or post material has degraded. On vintage wooden gates common in Keene’s 1970s–1990s housing stock, we preserve the original hardware footprint when possible to maintain the gate’s character.
Lock Repair & Rust Treatment
Keene’s periodic winter ice storms freeze latches and stress lock mechanisms. We repair or replace gate locks, install weather-resistant strikes, and apply rust treatment systems that penetrate existing oxidation on iron hardware. For property owners near Southwestern Adventist University managing rental or commercial access points, we upgrade to electronic strikes integrated with existing access control.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keene
Your brand, our expertise. We carry diagnostic experience and common parts for FAAC, BFT, Linear, and Viking operators, among others — nine brands total including LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. This multi-brand fluency means we service the system you already own rather than pushing a replacement that doesn’t match your gate geometry or access control setup. For Keene customers, we stock frequently needed FAAC and BFT components locally, cutting wait times for Johnson County jobs. We weld, we wire, we repair — fabrication and electronics under one crew.
Common Gate Repair Problems We See in Keene Homes
- Post heave and lean from black clay soil expansion. Keene’s acreage lots sit on some of the most aggressive shrink-swell clay in Texas. Posts set at standard depth heave seasonally, throwing the entire gate out of plumb. The gate itself is rarely the real problem.
- Hinge binding and frame stress from micro-movement. As posts shift fractions of an inch, hinges carry loads they weren’t designed for. Brass hinges oval out; steel hinges gall. We catch this before the gate tears its own mounting bolts out.
- Rust fatigue at weld points and latch hardware. Summers exceeding 100°F with high humidity accelerate oxidation on unpainted iron. Keene’s older ornamental gates — common on 1980s-era homes — often hide rust-thin metal beneath cosmetic paint.
- Smart opener integration with vintage wooden gates. Property owners on Keene’s larger lots want modern convenience without replacing character gates. We integrate LiftMaster and other operators with existing wooden and pipe-style structures, matching the mechanical load to the motor capacity.
Pricing for Gate Repair in Keene, TX
Here’s what gate repair costs in Keene’s market:
| Service | Typical Range in Keene |
|---|---|
| Hinge repair / replacement | $180 – $290 |
| Gate realignment (adjustment only) | $220 – $350 |
| Post repair with deep pier reset | $450 – $650 |
| Weld repair (on-site, structural) | $280 – $420 |
| Rust treatment + hardware refresh | $200 – $340 |
| Smart opener integration (existing gate) | $680 – $1,200 |
Post repair with pier work runs higher in Keene than in sandy-soil communities west of here — the 4-foot minimum depth into stable clay adds material and labor, but it also prevents the repeat failure that makes cheap quotes expensive. We provide upfront pricing before any work begins, and estimates are always free. Call (855) 914-8517 for an exact quote on your specific gate.
We Also Serve Cities Near Keene
Our Johnson County route covers Joshua, Burleson, Crowley, and Everman with the same owner-led service and same-day availability. If you’re on the edge of Keene city limits or managing multiple properties across southern Tarrant and northern Johnson counties, we coordinate multi-site visits to minimize your downtime.
Serving Keene, TX — Our Local Coverage Area
We’re based in the Keene area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Repair in Keene
Black clay soil beneath Keene expands when wet and shrinks when dry, exerting tremendous pressure on posts set within the active zone. Posts without footings below 3–4 feet heave and tilt within two to three seasons. We fix this by setting posts on deep concrete piers that anchor below the clay movement layer — call (855) 914-8517 for a free assessment of your post depth.
Yes — we regularly integrate modern operators with Keene’s older wooden and pipe-style ranch gates. The key is matching motor torque to gate weight and ensuring the frame can handle automated cycling without reinforcing welds. Dennis evaluates the gate structure on-site before specifying equipment.
We replace standard latches with weather-resistant strikes and can install electronic releases that eliminate mechanical freeze points entirely. For Keene’s periodic ice storms, we also recommend drain improvements at the gate base to prevent standing water that refreezes against hardware.
Minimum 4 feet into undisturbed soil below the active clay zone, with a concrete pier wider than the post itself. Shallower footings in Keene’s black clay guarantee seasonal movement. Experienced local technicians quote footing depth before quoting anything else — the gate is rarely the real problem.
Yes — we carry diagnostic experience and common parts for both FAAC and BFT systems, and we perform the structural welding these European-spec operators often require on American iron gate frames. Call (855) 914-8517 to schedule; estimates are free.
Written by Dennis Price, Owner at Everest Gate Repair Service Dallas Fort Worth, serving Keene and Johnson County since 2013.