Ghost Controls Gate Repair in Hurst, TX | Everest Gate Repair Service Dallas Fort Worth
Ghost Controls gate repair in Hurst typically runs $180–$450 depending on whether you’re looking at a simple limit-switch adjustment or a full motor rebuild after clay-soil damage. We’re an independent Ghost Controls service provider — not manufacturer-authorized — and we’ve rebuilt over 100 of these operators across Tarrant County, including throughout Hurst’s 76053 and 76054 ZIP codes. Dennis Price, our owner and lead technician, carries OEM Ghost Controls parts in stock and knows the wiring quirks of every model from the TSS1 to the GCO-1G2. Call (855) 914-8517 for a free estimate, often same-day.
Why Hurst Residents Choose Us for Ghost Controls Service
We’ve been fixing gates in Hurst for eleven years, and Ghost Controls has become one of the brands we see most often in the city’s older neighborhoods. The TSS1 and TSS2 Series are popular with homeowners who installed DIY kits from big-box stores, then realized that North Texas clay doesn’t forgive a slightly shallow post or a mounting bracket that’s not torqued to spec.
Dennis Price grew up near the Stockyards district in Fort Worth and never really left — he’s been fixing things in this county his whole life. He learned the mechanical and electrical fundamentals through Tarrant County College’s Industrial Technology program, then spent years getting his hands dirty on everything from simple hinge replacements to full underground operator overhauls. That background matters when a Ghost Controls unit is throwing a fault code that the manual doesn’t explain, or when a gate post in the Bedfordshire neighborhood has walked so far out of plumb that the operator’s auto-close timer is fighting the frame every cycle.
We’re not a call center dispatching subcontractors. Dennis and his team show up with tools, parts, and welding capability — we don’t defer structural repairs to a separate metal shop. Our 707 verified reviews averaging 4.8 stars reflect that approach. “Your brand, our expertise” isn’t a slogan; it’s how we work. If you’ve got Ghost Controls hardware on a gate that’s seen three decades of Hurst’s freeze-thaw cycles, we’ll diagnose it correctly and fix it without trying to sell you a whole new system.
Common Ghost Controls Gate Repair Problems We Solve in Hurst
- Motor burnout from clay-heave drag. Hurst’s expansive black clay swells in spring rains and shrinks in summer drought, gradually rocking gate posts out of plumb. The Ghost Controls controller tries to compensate for the increased drag, overheating the DC motor until it fails. We see this most often on original cedar posts in neighborhoods like Bedfordshire — the post tilts, the gate binds, and the TSS1 motor cooks itself trying to push through. We reset the post in a proper concrete footing, realign the frame, and replace the motor with an OEM unit.
- Limit switch misalignment from freeze-thaw vibration. Every February ice storm and spring clay swell vibrates the operator chassis loose. The magnetic or mechanical limit switches on TSS2 and GCO-1G2 units drift, causing gates to reverse mid-cycle or stop short of full open. We recalibrate the limits, lock down the mounting hardware with thread-locking compound, and shim the bracket if the post itself has shifted.
- Corroded control board solder joints. Hurst’s 1960s–1980s housing stock often has slab-mounted junction boxes with no water barrier. Humidity wicks through conduit, especially after heavy spring rains, and attacks the solder joints on Ghost Controls boards. The gate acts erratically — works fine one day, dead the next. We source OEM replacement boards and reseal the junction box with proper gaskets and dielectric grease.
- Gear train stripping from aggressive auto-close timers. Homeowners set the timer tight for security, but a heavy wooden gate on a tilted post from clay movement creates constant stall friction. The nylon or brass gears in the TSS1 eventually strip. We replace the gear train, adjust the timer to realistic cycle times, and fix the underlying alignment so it doesn’t happen again.
- Post rot and frame rack beyond hardware repair. Original pine or cedar posts in Hurst’s ranch-home neighborhoods commonly reach end-of-life after 30+ years. Hinges seize, bottom rails rot, and no Ghost Controls operator can compensate for a gate that’s essentially parallelogrammed. We weld new steel or pressure-treated frames in-house and set posts with rebar-reinforced footings that survive the clay cycle.
Ghost Controls Service in Hurst: What Local Conditions Mean for Your Equipment
Hurst’s 200+ miles of underground drainage easements, maintained by the Tarrant Regional Water District, run directly under many alley-accessed gate posts. Our technicians have to hand-dig around utility markers before setting new concrete footings — a step unique to this city’s clay-heavy infrastructure. Miss that marker, and you’re explaining to a homeowner why their gate is out of service for two weeks while the district sorts out a line strike.
This matters for Ghost Controls owners specifically because these operators are often installed by DIYers who don’t know to call 811 or check easement maps. We’ve found TSS1 units bolted to posts that were poured six inches from a 24-inch storm drain, with no rebar, no expansion gap, and no drainage rock. The clay does the rest — the post heaves, the bracket cracks, the motor burns out, and the homeowner thinks they got a bad operator. They didn’t. They got a bad footing in a city where footings are half the battle.
We repaired a Ghost Controls TSS1 on a double-driveway gate at a ranch-style home on Fuller Drive, where the north post had heaved 3 inches during the wet spring and cracked the operator’s mounting bracket. We unbent the gate frame, reset the post in a 5-foot concrete footing with rebar, and replaced the stripped drive gear — the gate now cycles smoothly through the Clay Road neighborhood’s worst dry-season settle.
Ghost Controls Models & Products We Service in Hurst
We work on the full Ghost Controls residential and light-commercial line: TSS1 Series (single swing, most common in Hurst’s backyard gates), TSS2 Series (dual swing, popular for wider driveway entrances), GCO-1G2 Series (the newer WiFi-enabled units), and ACS Series access control accessories.
Our parts approach is straightforward: OEM Ghost Controls motors, control boards, and safety sensors to maintain compatibility and warranty support where applicable. For hinges, brackets, and fasteners, we stock quality aftermarket hardware that meets or exceeds factory spec — often galvanized or stainless for Hurst’s humidity and clay-salt exposure. We don’t guess at parts. If I can’t tell you exactly what’s wrong before I quote you, I’m not doing my job.
Most common failures — limit switches, gear trains, board replacements — we can complete same-day because Dennis keeps inventory in the service vehicle. No waiting on drop-shipped parts from Georgia.
Ghost Controls Service Pricing in Hurst
| Service | Typical Range |
|---|---|
| Diagnostic & tune-up (limit adjustment, safety check, lubrication) | $180 – $260 |
| Motor or control board replacement (OEM parts) | $320 – $450 |
| Gear train rebuild with alignment correction | $280 – $380 |
| Post reset with concrete footing (rebar-reinforced, 4–5 ft depth) | $400 – $650 |
| Full gate frame rebuild with in-house welding | $800 – $1,400 |
What drives cost: parts availability (OEM vs. aftermarket), whether the post needs resetting, and how far the clay has racked the frame. Our free estimate includes a full diagnostic — we’ll tell you if it’s a $200 adjustment or a $1,200 rebuild before we start. No charge to look. Call (855) 914-8517 for an exact quote on your Ghost Controls system.
Serving Hurst, TX — Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Ghost Controls Gate Repair in Hurst
No. We’re an independent repair company with no manufacturer affiliation. We’ve chosen this deliberately — it lets us source the best parts for your specific failure, mix OEM and quality aftermarket as needed, and recommend replacement only when it truly makes sense. Our 11 years and 700+ reviews in Tarrant County speak to whether that approach works. Call (855) 914-8517 if you want a straight assessment of your unit.
We use OEM Ghost Controls parts for motors, control boards, and safety sensors — these are precision-matched to the controller firmware and shouldn’t be substituted. For hinges, brackets, fasteners, and mounting hardware, we often use quality aftermarket equivalents that hold up better to Hurst’s clay and humidity. We’ll tell you exactly which category your repair falls into before we order anything.
Most single-component repairs — limit switch, board swap, gear train — we complete in 2–3 hours same-day. Post resets require a return trip after the concrete cures (typically 48 hours), though we’ll get the gate manually operable and secure before we leave. If we don’t have your specific OEM board in stock, it’s usually 24–48 hours. Call (855) 914-8517 to check current parts availability.
We service TSS1, TSS2, GCO-1G2, and ACS Series access controls across all production years. We’ve also worked on discontinued Ghost Controls models and can often fabricate mounting adapters or source refurbished boards when factory parts are obsolete. Your brand, our expertise — we don’t turn away a system just because it’s not the current catalog.
Repair typically runs $180–$450; full replacement with new operators and hardware runs $1,800–$3,200 installed. The deciding factor is the gate structure itself. If your posts are rotted or racked from clay heave, putting new Ghost Controls hardware on a failing frame is throwing good money after bad. We’ll tell you honestly which side of that line you’re on. Call (855) 914-8517 for a free estimate — we’ll give you both numbers so you can decide.
Service Areas Near Hurst
We run Ghost Controls service calls across the Mid-Cities and beyond — Euless and Bedford share Hurst’s clay-soil challenges and aging ranch-home stock; Irving and Grand Prairie bring their own mix of newer installations and older gate systems; and we regularly cross into Dallas proper for commercial access-control work. Same-day response is usually available within 20 minutes of Hurst’s city center.
Book Your Ghost Controls Service in Hurst Today
A gate that won’t close or opens on its own isn’t a minor annoyance in Hurst — it’s a security gap and a liability, especially on alley-accessed properties. Dennis and his team can usually diagnose your Ghost Controls system same-day and have most repairs finished before the afternoon clay heat sets in. Eleven years, one specialty. We weld, we wire, we repair.
Call (855) 914-8517 now for your free estimate.
Written by Dennis Price, Owner at Everest Gate Repair Service Dallas Fort Worth, serving Hurst and Tarrant County since 2013.