Fast, Reliable Gate Installation Across Keene
Gate installation in Keene, TX typically runs $2,800–$7,500 depending on gate type, materials, and the critical work of setting posts below Johnson County’s active clay zone. Most Keene installations are completed in one to two days, with Dennis and his crew arriving from our Irving base ready to handle the soil conditions that define every job here. Call (855) 914-8517 for a free estimate — we’ll quote footing depth before we quote anything else.
We’ve been driving out to Keene for eleven years, and we’ve learned that this small semi-rural community southwest of Fort Worth presents gate challenges you won’t find in sandy-soil towns just west of here. The black clay beneath properties off Hill Street, Old Betsy Road, and around Southwestern Adventist University swells with spring rains, then contracts into deep cracks by August. Gates that look perfectly plumb in October lean and bind by the following summer. That’s why our Gate Installation team treats every Keene job as a footing-first project — because the gate itself is rarely the real problem.
Why Everest Gate Repair Service Dallas Fort Worth Is Keene’s Preferred Gate Installation Company
Local reputation built on clay-soil expertise. Keene homeowners don’t need a technician who guesses at post depth. Dennis Price, our owner and lead technician, has personally installed and repaired gates across Johnson County long enough to know that 2-foot footings fail here. We quote 4-foot concrete piers as standard on Keene acreage lots. That specificity is why customers from the university neighborhood to the rural stretches near 76059 call us back when they expand their fencing.
707 verified reviews, 4.8-star average. Our review volume reflects thousands of completed jobs across the DFW corridor, including repeat work in Keene and neighboring Joshua. Customers specifically mention Dennis’s on-site decision-making — no entry-level subcontractors guessing at your gate geometry.
Response time to Keene. We’re typically on-site within 24–48 hours for standard installations, same-day for gate failures that leave a property unsecured. From our Irving location, we’re down Highway 67 and onto Keene’s local roads without the scheduling delays of smaller one-truck operations.
Your brand, our expertise. Keene’s older housing stock — much of it built from the 1970s through the 1990s — often has legacy gate hardware that’s no longer supported by the original manufacturer. We’re experienced across nine major brands including Linear, Viking, and BFT, so we can retrofit modern openers onto existing gates rather than forcing a complete replacement.
Our Gate Installation Services in Keene
Driveway Gate Installation
Keene’s acreage lots and semi-rural properties demand driveway gates that can span wider openings while surviving soil movement. We install single and double swing gates, plus sliding systems for properties where grade or space limits swing clearance. Every driveway gate we install in Keene gets footings poured below the active clay zone — typically 4 feet, sometimes deeper on hillside properties off Old Betsy Road. For automated systems, we match opener capacity to gate weight and wind load, spec’ing Linear or Viking operators with the torque to handle Keene’s occasional ice accumulation without straining the motor.
Swing Gate Installation
Swing gates remain the most common request in Keene’s residential areas, from modest homes near the university to larger lots on the community’s outskirts. We build them in steel, aluminum, and wood — though we’re direct with customers about wood’s limitations here. Those 100°F-plus July days warp boards; the clay soil stress cracks frames. When a Keene customer wants the ranch-gate aesthetic, we typically recommend steel framing with wood overlay, or we steer them toward powder-coated aluminum that mimics the look without the maintenance burden. Our field vignette: On a double-driveway gate off Hill Street, our crew found a 1980s wooden ranch gate sagging an inch out of plumb. The original 2-foot post footings had heaved in the clay; we replaced them with 4-foot concrete piers and installed a pair of Ghost Controls swing openers. The gate has stayed level through two wet springs and a 104°F July.
Pedestrian Gate Installation
Keene properties with full perimeter fencing need pedestrian gates that match the driveway gate in both style and structural integrity. We see too many installations where the walk-through gate gets shallow footings while the driveway gate gets proper depth — then the pedestrian gate leans worse because it lacks the mass to resist soil pressure. We don’t do that. Every pedestrian gate in Keene gets the same pier specification as its larger counterpart, with latch hardware selected for freeze-thaw durability. For properties near Southwestern Adventist University with higher foot traffic, we spec commercial-grade hinges and self-closing mechanisms.
Sliding Gate Installation
Sliding gates solve the clearance problems that swing gates create on Keene’s narrower county roads and driveways with limited setback. The track system demands perfectly level installation — which means even more attention to footing stability in our shrink-swell clay. We pour monolithic concrete track pads rather than individual post footings, spreading soil-movement stress across a wider base. For the rolling hardware, we use sealed-bearing V-groove wheels rated for Johnson County’s dust and moisture cycles. When space allows, we prefer cantilever designs that eliminate ground track entirely — fewer points of failure when the clay shifts.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keene
We don’t show up to your Keene property to experiment. Dennis and his team carry direct experience with nine major gate operator brands — including Linear, Viking, and BFT — which means we can source the right replacement parts or specify compatible upgrades without trial-and-error delays. For Keene customers with legacy systems, this matters: a 1990s FAAC or Elite opener may have discontinued control boards, but we know which modern units will interface with your existing gate geometry and which won’t. We keep common Linear and Viking components stocked for faster turnaround on Keene service calls, and our welding capability means we can fabricate mounting brackets on-site when standard adapters don’t fit older gate frames.
Common Gate Installation Problems We See in Keene Homes
- Post footings set in the active clay zone. On Keene’s acreage lots, posts poured 2 feet deep heave and lean within two to three seasons. The gate drags, the latch misses, and the opener strains. We replace these with 4-foot concrete piers minimum — deeper on hillside properties.
- Original 1970s–1990s openers failing from corrosion. Decades of clay moisture and occasional freeze-thaw salt exposure destroy control boards and motor windings. We can often retrofit modern operators onto existing gate frames, saving the cost of full gate replacement.
- Wooden gates warping and splitting under thermal stress. Keene’s 100°F-plus summers cook moisture from cedar and pine boards that were already stressed by soil-driven frame movement. We see this most on ranch-style gates installed in the 1980s with minimal sealing.
- Gate frames knocked out of square by seasonal soil cycles. Even steel gates suffer when posts move independently. We diagnose whether the frame can be re-squared or whether post replacement is the only permanent fix — and we’re direct about which is which.
Pricing for Gate Installation in Keene, TX
| Gate Type | Typical Range in Keene | Key Cost Driver |
|---|---|---|
| Single swing driveway gate (manual) | $2,800–$4,200 | Material, width, footing depth for clay |
| Double swing driveway gate (manual) | $3,800–$5,500 | Dual post footings, heavier frame |
| Single swing with opener | $4,500–$6,800 | Operator brand, access control features |
| Sliding gate with track | $5,200–$7,500 | Track pad construction, motor sizing |
| Pedestrian gate (matched to existing) | $1,400–$2,600 | Footing depth, latch hardware grade |
| Post replacement / footing repair only | $800–$1,800 per post | Depth required, access for auger |
These Keene ranges assume standard residential access and typical lot conditions off paved roads. Remote acreage properties with limited equipment access, or gates exceeding 16 feet in width, run higher. The defining variable in every Keene quote is footing depth — we don’t compromise on pier specification because we warranty our work and we don’t return to re-level gates we installed. Call (855) 914-8517 for an exact quote; estimates are free and include a soil-assessment walk of your gate line.
We Also Serve Cities Near Keene
Our gate installation crews work throughout Johnson County and the southwestern DFW corridor, including Joshua, Burleson, Crowley, and Everman. Each community has its own soil profile and typical housing stock — Burleson’s newer subdivisions present different footing challenges than Keene’s older acreage lots — and we adjust our specifications accordingly. Whether you’re in 76059 or a neighboring ZIP, Dennis and his team bring the same owner-operator accountability to every job.
Serving Keene, TX — Our Local Coverage Area
We’re based in the Keene area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Installation in Keene
Keene sits on Johnson County’s black clay (Blackland Prairie) soils, which swell when wet and contract dramatically during dry spells. Posts set with shallow footings in this active clay zone get pushed out of plumb within two to three seasons — a pattern so consistent that experienced local technicians quote footing depth before quoting the gate itself. We pour 4-foot concrete piers minimum on Keene acreage properties, deeper than sandy-soil areas west of here require. Call (855) 914-8517 to schedule a site assessment.
Yes, in most cases we can retrofit modern operators onto legacy gate frames from the 1970s–1990s, provided the frame itself is structurally sound and the posts are stable. Dennis and his team are experienced across nine brands including Linear and Viking, so we can match an opener to your existing gate weight and geometry rather than forcing a complete replacement. We evaluate the frame, hinges, and post condition on-site before recommending retrofit versus full replacement. Call (855) 914-8517 for a free evaluation of your specific gate.
Powder-coated aluminum or galvanized steel with welded frames outperform wood in Keene’s climate. The combination of 100°F-plus summers, periodic ice storms, and clay-soil movement destroys wooden gates within 5–8 years, while properly installed steel or aluminum lasts 15–20 years with minimal maintenance. We steer Keene customers toward metal construction with wood-look finishes when aesthetics matter. Call (855) 914-8517 to discuss material options for your property.
Permit requirements in Keene depend on gate height, location relative to the right-of-way, and whether the installation includes electrical work for automation. Johnson County jurisdictions typically require permits for gates exceeding 6 feet in height or those with powered operators connected to permanent electrical service. We advise checking with Keene city offices or Johnson County permitting before work begins, and we can provide technical specifications for your permit application as part of our installation service. Call (855) 914-8517 and we’ll walk you through the local requirements.
4 feet minimum below grade, and deeper on hillside properties or where the active clay zone extends further down. The 2-foot footings common in sandy-soil areas fail predictably in Keene’s black clay; we’ve replaced hundreds of them across Johnson County. On a recent job off Hill Street, original 2-foot footings had heaved so badly that a 1980s ranch gate was sagging an inch out of plumb — we replaced them with 4-foot piers and the gate has stayed level through two wet springs and a 104°F July. Call (855) 914-8517 for a site-specific footing assessment.
Ready to get your Keene gate installed right? Dennis and his crew are available for free estimates across 76059 and surrounding Johnson County areas. Whether you’re replacing a leaning legacy gate or installing new access control on an acreage property, we’ll specify footings that survive the clay, match operators to your existing brand when possible, and warranty our work. Call (855) 914-8517 today — we’ll typically be on-site within 24–48 hours.
Written by Dennis Price, Owner at Everest Gate Repair Service Dallas Fort Worth, serving Keene and Johnson County since 2013.