How Much Does Gate Motor & Opener Cost in Irving, TX?
Gate motor and opener costs in Irving, TX typically range from $280 to $1,800 depending on whether you need a repair, a motor replacement, or a full new installation with access control. Most single-motor repairs land between $280 and $550, while a new residential swing or slide gate operator installed by Dennis Price and his team runs $650 to $1,200 on average. Commercial operators, dual-motor setups, and access control integrations push toward the higher end of that range.
If you’d like a free, no-obligation estimate specific to your gate and your Irving property, call (855) 914-8517 — Everest Gate Repair Service provides upfront pricing before any work begins.
—
Gate Motor & Opener Cost Breakdown (2026)
The table below reflects actual pricing ranges Dennis and his team see across Irving residential neighborhoods — from single-family driveways in Las Colinas and Valley Ranch to HOA entrances in Hackberry Creek and commercial properties along Highway 183.
| Service Type | Typical Price Range (Irving, 2026) | Notes |
|---|---|---|
| Gate motor diagnostic / service call | $85 – $135 | Applied toward repair cost if work is authorized |
| Motor repair (labor + minor parts) | $175 – $375 | Control board resets, limit adjustments, wiring fixes |
| Control board replacement | $220 – $450 | Varies significantly by brand — FAAC and BFT boards run higher than Mighty Mule |
| Residential swing gate motor replacement | $550 – $950 | Includes LiftMaster, Ghost Controls, Elite, Viking units |
| Residential slide gate motor replacement | $600 – $1,050 | Rack-and-pinion or chain-drive; heavier gates cost more |
| Commercial / high-cycle gate operator | $950 – $1,800+ | DoorKing, FAAC, Linear commercial units; duty-cycle rated |
| Dual-motor installation (dual swing gate) | $1,100 – $2,200 | Synchronized motors for two-leaf estate or HOA gates |
| Access control integration (keypad / intercom) | $250 – $700 added | DoorKing, Linear, LiftMaster access add-ons |
| Remote / transmitter programming | $45 – $95 | Per remote; included free when motor is replaced by our team |
| Solar kit installation (add-on) | $180 – $420 | Common in Irving properties without nearby power run |
A few things drive price variance more than people expect. Brand parts availability matters considerably: LiftMaster and Mighty Mule parts are stocked regionally and are less expensive to source, while FAAC and BFT components are imported and carry a premium. Gate weight and leaf width also matter — a standard 12-foot driveway gate in Irving’s older residential areas requires a different duty-cycle motor than the 20-foot estate gates increasingly common in the gated communities off MacArthur Boulevard. Finally, electrical access plays a role: properties where the power run is already in place near the gate post pay meaningfully less than jobs that require conduit work to reach the operator.
—
What Affects Gate Motor & Opener Pricing in Irving
- Gate type and weight: Slide gates weighing over 600 lbs — not uncommon on older iron installations in Irving’s industrial-adjacent areas near Spur 482 — require higher-torque motors that cost $150 to $300 more than residential-grade units. Swing gates are generally lighter but two-leaf configurations double the motor count and wiring complexity.
- Brand of operator: Dennis and his team are experienced across nine brands — LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule — and pricing follows parts cost. European import brands like FAAC and BFT carry a 20–35% parts premium over domestically distributed lines. Staying same-brand when replacing means you don’t have to retrofit mounting hardware, which saves labor time and money.
- Repair vs. full replacement: If a motor is under 7 years old and the control board is the only failure point, repair almost always costs less than replacement. If the motor is 12+ years old and showing mechanical wear — which we regularly diagnose on older Las Colinas and Valley Ranch properties — full replacement often makes more financial sense within 18 months.
- Access control complexity: Irving commercial properties along Belt Line Road and Esters Road frequently require DoorKing or Linear telephone-entry integration, adding $250 to $700 to a base motor job. Residential keypads are at the lower end of that range; video intercom systems with cloud access push higher.
- Power infrastructure: Some Irving properties — particularly newer construction in areas like Hidden Lake Estates or properties that expanded their driveway footprint — don’t have a conduit run to the gate post yet. Adding that electrical infrastructure adds $120 to $350 depending on the run length, and it’s a cost worth knowing about before the job begins rather than after.
- Same-day vs. scheduled work: Everest Gate Repair Service carries a working inventory of the most common motors and control boards for the brands we service most frequently in Irving. Same-day availability is often possible without a premium — but specialty commercial units may require a parts order, which adds lead time rather than cost.
—
How to Save on Gate Motor & Opener in Irving
Saving on gate motor work isn’t about finding the cheapest bidder — it’s about avoiding the second service call. Here’s where Irving homeowners and property managers consistently leave money on the table, and how to avoid it.
Get a Diagnostic Before You Commit to Replacement
A lot of gate motors that appear “dead” in Irving’s summer heat have failed control boards, corroded terminal connections, or tripped thermal overloads — not a failed motor. A proper diagnostic, which Dennis performs on every call rather than delegating to a less experienced tech, separates a $220 board replacement from an unnecessary $800 motor swap. Don’t let anyone quote you a full replacement without first completing a hands-on electrical diagnosis.
Stay Same-Brand When Possible
If your existing Viking or Elite operator is repairable or is being replaced, staying with the same brand family avoids bracket retrofits, wiring adapter costs, and reprogramming time. Our nine-brand depth means we can usually source same-brand parts without steering you toward a pricier substitute just because we don’t stock the original.
Bundle Access Control Work with Motor Replacement
If you’re already replacing a motor, adding a keypad or entry system at the same visit saves a separate service-call fee. In Irving’s HOA-dense neighborhoods like Hackberry Creek or Las Colinas Village, bundling motor replacement with access control upgrades is one of the most cost-effective timing decisions a property manager can make.
Ask About Solar — It Reduces Long-Term Operating Costs
Several Irving properties, particularly those with gates positioned away from the main structure, spend more on electrical conduit runs than a solar add-on would cost. A solar kit in the $180–$420 range often pays for itself in avoided conduit labor on new installations. It also eliminates gate failure during power outages — a real concern during Irving’s periodic severe weather events that can knock grid power for hours.
Call for a Free Estimate — Know Your Number Before You Decide
Everest Gate Repair Service provides free estimates on gate motor and opener work throughout Irving. There’s no pressure and no obligation. Knowing the exact number before you decide is the single most effective way to avoid overpaying — or under-investing and getting a repair that doesn’t hold. Call (855) 914-8517 and Dennis or his team will walk you through the options specific to your gate, your brand, and your property before a dollar changes hands.
Homeowners across Irving have also found value in reviewing what full gate motor and opener service involves — you can explore a related guide on Gate Motor & Opener in Fort Worth to see how our scope of work applies across the DFW market, or visit our home page for a full overview of Everest Gate Repair Service’s capabilities.
—
FAQs — Gate Motor & Opener Cost in Irving, TX
How much does gate motor repair cost in Irving, TX?
Gate motor repair in Irving typically costs between $175 and $450 for labor and parts, depending on what failed. Control board replacements run $220–$450; wiring repairs and limit-switch adjustments are often in the $175–$280 range. The diagnostic call fee ($85–$135) is credited toward the repair when you move forward with the work. Call (855) 914-8517 for a free estimate — we’ll diagnose before we quote.
Is it cheaper to repair or replace a gate motor in Irving?
Repair is almost always cheaper in the short term — a repair typically runs $175–$450 versus $550–$1,050 for replacement. The decision shifts toward replacement when the motor is over 10–12 years old, has had multiple failure points in the past two years, or uses a discontinued parts platform. Dennis evaluates both options on every diagnostic call and gives you a straight answer on which makes more financial sense for your specific unit. Call (855) 914-8517 to get that assessment done right.
How much does a new gate operator installation cost in Irving?
A new residential gate operator installation in Irving runs $650 to $1,200 for a single-motor swing or slide setup, including the unit, hardware, and programming. Dual-motor estate or HOA gates run $1,100–$2,200. Commercial-grade operators start around $950 and scale up based on duty-cycle rating and access control integration. Call (855) 914-8517 and we’ll give you a firm number for your specific gate before any work starts.
What gate motor brands do you service in Irving?
Everest Gate Repair Service works on nine brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Irving has a diverse mix of operator brands across its residential, HOA, and commercial properties — especially in communities like Las Colinas and along the commercial corridors near SH-161 — so brand-agnostic expertise matters. We service what’s already installed rather than pushing you toward a brand we happen to stock.
Can you come out the same day for gate motor service in Irving?
Same-day service in Irving is available in most cases. Dennis and his team carry a working inventory of common motors, control boards, and parts for the brands we service most frequently in the DFW market. If your gate fails on a weekday, a same-day visit is realistic in the majority of situations. Specialty commercial units may require a parts order. Call (855) 914-8517 early and we’ll confirm availability for your area of Irving.
Do you charge for estimates on gate motor work in Irving?
No — Everest Gate Repair Service provides free estimates on gate motor and opener work throughout Irving. We believe in upfront pricing: you’ll know the cost before we begin, with no surprises on the invoice. Call (855) 914-8517 to schedule your free on-site estimate.
—
Ready to Get an Exact Quote for Your Irving Gate?
Dennis Price has spent 11 years working on gates — and only gates — across Irving and the broader DFW area. With 707 verified reviews averaging 4.8 stars and hands-on experience across nine major gate motor brands, Everest Gate Repair Service is built for Irving property owners who want a straight answer and a repair that holds. Whether you’re troubleshooting a motor that’s stopped responding on a Las Colinas driveway or planning a new operator installation for an HOA entrance in Hackberry Creek, Dennis and his team bring the same owner-operated attention to every job.
Call (855) 914-8517 for a free estimate — upfront pricing, no obligation, and a technician who knows exactly what they’re looking at when they arrive.
Written by Dennis Price, Owner at Everest Gate Repair Service Dallas Fort Worth, serving Irving, TX since 2014.
Pricing reflects the Irving market as of 2026. Everest Gate Repair Service Dallas Fort Worth offers free estimates — call (855) 914-8517.