Gate Motor & Opener in Hurst, TX | Everest Gate Repair Service Dallas Fort Worth

Gate Motor & Opener in Hurst - Free Estimate, One Written Price

Free on-site estimate and a written price that includes the site prep, the power run and the safety gear. Install date agreed before we order, and the system handed over tested and documented.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Up to 11
Years Technician Experience
707+
5-Star Reviews
Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Fast, Reliable Gate Motor & Opener Across Hurst

Gate motor and opener repair in Hurst typically runs $280–$650 for most jobs, with same-day service available throughout the 76053 and 76054 ZIP codes. We’re usually on-site in Hurst within 45 minutes of your call.

Technician using multimeter to repair electronic gate motor control board in Hurst, TX

Call (855) 914-8517

We know Hurst’s neighborhoods - from the ranch homes along Bedford Road to the established streets near Hurst Hills and the properties backing up to the Trinity River greenbelt. Hurst’s 1960s-through-1980s housing stock means we’re not guessing when we arrive. We expect aging cedar posts, clay-shifted frames, and original hardware that’s finally given out after three decades. That’s why our Gate Motor & Opener technicians carry welding gear, deep-set post anchors, and replacement units from nine major brands - so we fix it in one trip, not two. Call (855) 914-8517 for a free estimate.

Why Everest Gate Repair Service Dallas Fort Worth Is Hurst’s Preferred Gate Motor & Opener Company

Our reputation in Hurst is built on showing up prepared. That matters when your gate is the only access point to your backyard workshop or your RV pad off Pipeline Road.

707 reviews averaging 4.8 stars back our work across Dallas-Fort Worth, including dozens from Hurst homeowners who needed their aging ranch gates brought back to working order. They mention the same things: Dennis knew their LiftMaster or Mighty Mule unit without looking up a manual, and he had the parts on hand.

Response time to Hurst averages under 45 minutes from dispatch. We’re serving Irving, with direct routes up Highway 183 or Airport Freeway - no crossing through downtown Dallas traffic to reach you.

Our local knowledge runs deeper than GPS. We know that Hurst’s expansive black clay soil heaves gate posts out of plumb every spring, that the February 2021 ice storm warped wood gates across Tarrant County, and that a “simple” motor replacement on a Hurst ranch home often requires post stabilization first. We bring concrete, rebar, and welding equipment because we’ve learned what this ground does to gates.

Our Gate Motor & Opener Services in Hurst

Motor Installation

New gate motor installation in Hurst runs $480–$920 for a standard residential swing or slide unit, including mounting hardware and basic programming. Most Hurst ranch homes need more than a box-store motor dropped on an existing post - the clay soil demands deeper footers and heavier-duty brackets. We install LiftMaster, FAAC, and Elite units rated for the actual weight of your gate, not the sticker on the box. For properties near the Hurst Hills neighborhood or along major arterials with heavier traffic exposure, we spec motors with higher cycle ratings and reinforced mounting plates.

Motor Installation

Motor Repair

Gate motor repair in Hurst typically costs $180–$340 for electrical diagnostics, gear replacement, or control board work. Before we quote, we check whether your motor failed because the motor itself wore out - common after 10–15 years - or because the gate frame shifted and overloaded the mechanism. In Hurst, it’s often the latter. The clay soil pumps posts loose, the gate racks out of square, and the motor burns out trying to push a binding track. We fix the motor AND the underlying alignment. That’s the difference between a repair that lasts two months and one that lasts ten years.

Motor Repair

Linear Motor Service

Linear motor repair and replacement in Hurst ranges from $320–$580 for most residential swing gates. Linear actuators - the arm-style openers common on single-leaf ranch gates - are sensitive to hinge binding and post sag. In Hurst’s older neighborhoods, we regularly find linear motors that have stripped their internal gears because the gate post has tilted 3 degrees and the actuator is fighting that misalignment every cycle. We carry replacement linear units from Linear and Mighty Mule, plus the welding gear to re-square your frame before the new motor goes on. A linear motor on a plumb gate lasts 15 years. On a tilted post, it might not last 15 months.

Linear Motor Service

Slide Motor Installation & Repair

Slide motor work in Hurst runs $520–$1,100 for installation, $240–$450 for repair, depending on track length and gate weight. Slide gates are common on Hurst’s deeper lots and corner properties where a swing gate would block the driveway. The critical failure point here is track alignment - and Hurst’s clay soil shifts tracks out of level faster than almost any other substrate in North Texas. At a brick ranch on Bedford Road, the existing slide gate motor had jammed because the clay had shifted the gate frame 2 inches out of square. We replaced the motor with a heavy-duty LiftMaster pneumatic slide unit, reset the posts with a deep concrete footer extending below the clay zone, and installed a battery backup - one trip, done right.

Battery Backup Systems

Battery backup installation for gate openers in Hurst costs $180–$320. DFW’s severe weather pattern - spring thunderstorms, summer heat waves that strain the grid, and the occasional winter ice event - means power outages aren’t rare. A battery backup keeps your gate operational for 24–48 hours without utility power. For Hurst homeowners who use their gate as primary backyard or workshop access, that’s not a luxury. It’s the difference between parking on the street and getting your truck where it needs to go.

Technician performing professional repair on an automatic gate motor and opener system in Hurst, TX

Intercom Integration

Intercom and access control integration with your gate motor in Hurst runs $340–$680 depending on wiring distance and system complexity. Many Hurst ranch homes have original two-wire intercoms from the 1980s that no longer interface with modern opener controls. We run new low-voltage cable, program the relay outputs, and test the full cycle - gate open, intercom release, auto-close timer - before we leave.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 914-8517

Trusted Brands We Service in Hurst

Your brand, our expertise. We don’t guess. We don’t “try a part and see.” When your Elite slide operator throws an error code or your Mighty Mule linear arm seizes, we know the diagnostic sequence because we’ve done it before - on your brand, in Hurst soil conditions. We bring common failure parts for LiftMaster and FAAC units, the two most prevalent brands in North Texas residential installations. That means faster turnaround for Hurst customers, not a two-week wait for a control board shipped from out of state.

Common Gate Motor & Opener Problems We See in Hurst Homes

  • Seasonal clay movement racks gate frames out of square. Hurst sits on Tarrant County’s expansive black clay belt. Every wet spring, that soil swells upward and laterally, tilting posts and twisting gate frames. By August, the clay has shrunk and cracked, leaving posts loose in oversized holes. The result: slide gates that bind in their tracks and swing gates that drag or won’t latch - and motors that overheat from the strain.
  • Ice storms freeze moisture in wood components, warping rails and locking mechanisms. The February 2021 event wasn’t a fluke. When moisture trapped in cedar or pine gate rails freezes, it expands and splits the wood. That warpage transfers stress to hinges, rollers, and motor linkages. We replaced dozens of Hurst gate motors that winter not because the motors failed, but because the gates they were attached to had warped beyond operational tolerance.
  • Original cedar posts rot at the soil line from decades of clay-trapped moisture. Hurst’s 1960s–1980s housing stock means many backyard gates are on their original posts - or a replacement installed in the 1990s that’s now equally aged. Cedar and pine posts in contact with expansive clay don’t dry out evenly. The bottom 6–8 inches softens, the post tilts, and no hinge adjustment compensates for a post that’s essentially free-standing. Technicians working Hurst’s older interior neighborhoods frequently find they can physically push a 4×4 gate post by hand before touching the gate itself.
  • Motor burnouts from running misaligned gates. Homeowners sometimes replace a “bad” motor twice before realizing the motor was fine - it was fighting a gate that had shifted on its posts. We see this pattern repeatedly in Hurst’s Bedford Road corridor and Hurst Hills areas, where clay movement is most pronounced. The correct fix: stabilize the posts, realign the frame, then install the right motor for the actual gate weight and cycle frequency.

Pricing for Gate Motor & Opener in Hurst, TX

Service Typical Range in Hurst
Gate motor repair (diagnostics, gears, board) $180 – $340
Linear motor repair/replacement $320 – $580
Slide motor repair $240 – $450
New motor installation (swing gate) $480 – $920
New slide motor installation $520 – $1,100
Battery backup system $180 – $320
Intercom/access control integration $340 – $680
Post stabilization with concrete footer (per post) $140 – $280

What moves your price within these ranges? Gate weight and length (heavier gates need higher-torque motors), the condition of existing posts and framing (clay-damaged posts add stabilization work), and brand availability (we stock LiftMaster and FAAC parts; specialty European brands may need overnight shipping). Every estimate we provide in Hurst is free and itemized - no range given over the phone turns into a surprise on the invoice. Call (855) 914-8517 to schedule yours.

We Also Serve Cities Near Hurst

Our service radius covers the full Mid-Cities corridor. We regularly run gate motor and opener calls in Bedford, Richland Hills, North Richland Hills, and Colleyville - often the same day if we’re already working a Hurst job. If you’re on the border between Hurst and one of these neighbors, we’ll confirm your ZIP and give you an exact ETA.

Serving Hurst, TX - Our Local Coverage Area

We’re serving the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs - Gate Motor & Opener in Hurst

Why Hurst Chooses Everest Gate Repair Service Dallas Fort Worth

We set the standard for gate motor & opener in Hurst.

Irving-Specific Response

Our team is based in the DFW area and prioritizes Irving service calls - meaning shorter lead times, faster same-day availability, and technicians familiar with local property types and soil conditions.

Residential & Commercial Coverage

We service single-family driveways, HOA entry gates, apartment communities, and commercial facilities throughout Irving with equal depth of expertise and documentation.

Transparent Pricing, No Surprises

Every estimate is written and itemized before work begins. If scope changes on-site, we stop, explain, and get your approval - your budget is treated with the same precision as your gate.

What Hurst Customers Say

Trusted by homeowners across Hurst and surrounding areas.

★★★★★

"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."

Yusuf Aziz
★★★★★

"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."

Jessica Lin
★★★★★

"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."

Brianna Jackson

How It Works in Hurst

Getting your gate motor & opener handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate motor & opener needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Hurst - typically within 30–60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

Ready for Gate Motor & Opener in Hurst?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Hurst.

(855) 914-8517

Request a Free Estimate in Hurst

Tell us about your gate motor & opener needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Areas We Serve
Call Now - 24/7 Dispatch