Gate Motor & Opener in Keene | Call Now-10% Off | On-Site in 60 Minutes | Free Estimate

Fast, Reliable Gate Motor & Opener Across Keene

Gate motor repair in Keene typically runs $280–$650 for most residential jobs, with same-day or next-day service available throughout the 76059 area. We’re familiar with the specific challenges Keene properties face — from the clay-soil gate post shifts along Co Rd 3031 to the aging ranch-style hardware common near Southwestern Adventist University — and we carry parts for our Gate Motor & Opener service calls to minimize wait times. Dennis and his team respond to Keene within the hour during emergencies, and we stock Linear, FAAC, and Viking components based on what we see most often in Johnson County’s semi-rural properties. Call (855) 914-8517 for a free estimate.

Call (855) 914-8517

Why Everest Gate Repair Service Dallas Fort Worth Is Keene’s Preferred Gate Motor & Opener Company

We’ve built our reputation in Keene one repair at a time — 707 verified reviews averaging 4.8 stars, with many coming from Johnson County homeowners who’ve watched us excavate post footings others wouldn’t touch. Dennis Price shows up as the lead technician, not a subcontractor learning your gate brand on your dime.

Our response time to Keene averages under 45 minutes for urgent calls — we know that a stuck gate on an acreage lot off 917 or Old Betsy Road isn’t just inconvenient, it’s a security gap that leaves livestock or property exposed. We’ve replaced motors in the morning and returned for welding adjustments after the afternoon clay swell shifted the frame. That follow-through is why Keene customers call us back.

Eleven years specializing exclusively in gates means we’ve seen Keene’s specific failure patterns before: the 1980s-era Mighty Mule still clinging to life, the DoorKing board fried by a June thunderstorm surge, the slide gate binding because the post leaned another inch after last week’s rain. We don’t guess. We diagnose.

Our Gate Motor & Opener Services in Keene

Motor Installation

New motor installation in Keene runs $480–$1,200 depending on gate weight, access to power, and whether we’re dealing with fresh posts or clay-compromised footings. On acreage properties near the university or along rural routes, we often recommend deeper pier reinforcement before any motor goes in — a gate motor can’t compensate for a frame that shifts four inches seasonally. We install Linear, FAAC, Viking, and five other brands, matching the motor to your gate’s actual movement pattern, not just its dimensions.

Motor Repair

Repair calls in Keene typically cost $280–$450 when the motor itself is salvageable — control board replacement, gear kit rebuilds, limit switch realignment. But here’s what separates our diagnostics: we check post plumb first. Last spring, we responded to a call on Co Rd 3031 where a homeowner’s 20-year-old LiftMaster slide motor had burned out trying to open a gate that had shifted 4 inches due to clay movement. Instead of a simple motor swap, we excavated the post footing to 4 feet below grade, poured a reinforced concrete pier, and then installed a new FAAC 412 slide operator with a battery backup – ensuring the gate stays aligned through Keene’s wet-dry cycles. The motor wasn’t the problem. The footing was.

Linear Motor Service

Linear motors are our most frequent installation in Keene’s older residential stock — compact, reliable, and well-suited to the single-swing ornamental gates common in 1970s–1990s neighborhoods. Linear actuator replacement runs $320–$580; full new Linear system installation with arm and control box is $520–$890. We keep Linear LA500 and LA412 arms in stock because they’re the right match for Keene’s lighter residential gates, and we know which models tolerate the frame flex that clay soil induces.

Slide Motor Service

Slide motors dominate Keene’s acreage and pipe-gate installations — properties with 20-foot openings where swing gates aren’t practical. Slide motor repair in Keene: $340–$620. New chain-drive or rack-and-pinion installation: $680–$1,400. The critical factor on every Keene slide gate is track alignment, and track alignment depends on post stability. We weld, we wire, we repair — and on Keene’s black clay, that means we also pour concrete to depths that prevent the seasonal heave from destroying whatever motor we install.

Battery Backup

Keene’s summer thunderstorm power outages and occasional winter ice events make battery backup essential, not optional. Battery backup installation adds $180–$320 to any motor job. We spec sealed AGM batteries rated for North Texas heat — the cheap wet-cell batteries sold online cook in 100°F July afternoons and leave you stranded when the grid drops. For the FAAC 412 we installed on Co Rd 3031, the battery backup meant the gate worked through three outage events last year alone.

Intercom Integration

Intercom and access control integration runs $340–$780 depending on existing wiring and whether we’re retrofitting a 1990s two-wire system or pulling fresh cable. Keene’s older homes often have intercoms that outlived their original gate motor — we can interface modern openers with legacy call boxes, or upgrade the full stack. Dennis handles the low-voltage wiring personally; no subcontractor guessing at your pinout.

Trusted Brands We Service in Keene

Your brand, our expertise — that’s the promise. We carry parts and factory-trained experience across nine gate operator brands, but in Keene we see Linear, FAAC, and Viking most often on residential and light commercial jobs. Linear for the compact swing-arm retrofits on older homes. FAAC for the hydraulic slide operators that handle Keene’s heavier ranch gates without straining. Viking for the occasional commercial installation near the university or on rental properties. We don’t show up to “see what might fit.” We show up with the right board, the right arm, or the right gear kit already in the truck.

Common Gate Motor & Opener Problems We See in Keene Homes

• Motor burnout from clay-soil strain. In Keene, the dominant gate motor failure is not the motor itself but the chronic misalignment caused by the shrinking and swelling of the local Blackland Prairie clay soil, which pulls gate posts out of plumb and forces openers to work against binding frames. The motor overheats, strips gears, or burns out entirely — and replacing it without fixing the post is throwing money into the same hole.
• Control board failure from summer thunderstorm surges. North Texas lightning season fries electronics. We replace DoorKing, Elite, and Mighty Mule boards regularly after June and July storms, and we spec surge protection on every new install.
• Chain or belt wear from ice buildup. Keene’s occasional winter ice storms — the same events that lock up DFW freeways — freeze gate hardware, crack welds, and stress slide-gate chains. We see accelerated wear every January and February on systems that weren’t lubricated or tensioned before the freeze.
• Obsolete parts on 1980s–1990s operators. Keene’s housing stock includes decades-old gate hardware with discontinued control boards, proprietary gearboxes, or pre-UL safety systems. We source NOS parts when possible, but we’re direct about when retrofitting a modern Linear or FAAC unit is the smarter spend.

Pricing for Gate Motor & Opener in Keene, TX

We Also Serve Cities Near Keene

Our service radius covers Johnson County and southern Tarrant County regularly — we respond to Joshua, Burleson, Crowley, and Everman with the same stock of parts and same-day availability we bring to Keene. Clay soil issues diminish west of Joshua but persist throughout this corridor; we adjust our footing specs accordingly.

FAQs — Gate Motor & Opener in Keene