How Much Does Gate Parts & Welding Cost in Irving, TX?
Gate parts and welding repairs in Irving, TX typically run between $85 and $1,800, depending on the component, the extent of structural damage, and the brand of operator involved. Most homeowners in Irving pay somewhere between $150 and $650 for a common parts-and-welding job — think a cracked hinge plate, a corroded receiver bracket, or a bent gate frame section that needs to be cut, re-squared, and welded back into alignment. Dennis Price and the team at Everest Gate Repair Service have handled hundreds of these jobs across Irving over 11 years, so the numbers below reflect real local work — not national averages padded with guesswork.
Gate Parts & Welding Cost Breakdown (2026)
The table below reflects what Irving-area customers actually pay in 2026. Labor and material costs in the DFW Metroplex have shifted meaningfully since 2023 — steel stock, aluminum extrusions, and electronic components all carry higher base prices than they did three years ago. These ranges account for that reality.
| Service / Component | Typical Irving Price Range | Notes |
|---|---|---|
| Gate hinge replacement (residential) | $85 – $195 | Includes weld-on or bolt-on hinge; price varies by gauge and gate weight |
| Gate hinge replacement (heavy commercial) | $175 – $380 | Heavier wall thickness; commercial-grade hardware sourced same day when possible |
| Frame section weld repair (single crack or break) | $120 – $290 | Common after vehicle impact or long-term metal fatigue in Irving’s heat cycles |
| Frame section weld repair (multiple breaks / structural) | $280 – $650 | Gate may need to be re-squared before welding; adds labor time |
| Receiver bracket fabrication & weld | $95 – $220 | Fabricated on-site when stock part doesn’t match existing post spec |
| Motor mounting arm repair or fab | $110 – $260 | Critical fit point; wrong geometry causes premature motor wear |
| Picket replacement (per section, wrought iron / steel) | $75 – $180 | Cut-to-length, fitted, and welded flush with existing frame |
| Gate wheel / roller replacement | $90 – $210 | Nylon or steel; sliding gate track must be inspected at same time |
| Slide gate track section replacement | $140 – $320 | Concrete anchoring sometimes required; adds $60–$120 in Las Colinas or Heritage District properties with decorative concrete |
| Gate latch / lock mechanism replacement | $80 – $195 | Keyed, magnetic, or solenoid types; weld-on base plate included |
| Post repair or realignment weld | $150 – $420 | Leaning posts in North Irving clay soil are a recurring issue — weld reinforcement often paired with re-anchoring |
| Full gate panel fabrication (new gate, basic design) | $650 – $1,800 | Custom work; timeline 2–5 business days for most residential designs |
| Service call / diagnostic fee | $0 – $85 | Everest waives or credits the diagnostic fee when repair is authorized same day |
What Pushes the Price Up — or Down?
The single biggest cost driver on welding jobs is whether the gate is structurally square when Dennis arrives. A gate that has been sagging for a season and has pulled the frame out of alignment takes significantly more labor to restore than a gate that just snapped a hinge from a vehicle bump. In Irving’s commercial corridors — particularly along Story Road, MacArthur Boulevard, and the warehouse districts near Loop 12 — we regularly see gates that have been duct-taped open for weeks before anyone calls. By that point, the operator arm has often been bent by forced manual use, adding another line item to the repair.
Material cost is the other lever. Steel tube stock is priced by the pound at local Dallas-area suppliers, and 11-gauge square tube costs meaningfully more than it did in 2022. Aluminum welding — common on lighter residential gates in older Valley Ranch neighborhoods — requires a different rod type and slower technique, so it carries a slight labor premium over mild steel. Dennis stocks both aboard the work truck, so there’s no delay waiting on a supply run for most standard jobs.
What Affects Gate Parts & Welding Pricing in Irving
- Gate material and gauge: Wrought iron and heavy-wall steel tube cost more to weld than light-gauge steel or aluminum, both in consumable rod and in sheer labor time. Many older Irving properties — particularly homes built in the 1990s around the MacArthur Park and Cottonwood Creek neighborhoods — have thick ornamental iron that requires a higher-amperage setup and longer bead time.
- Extent of structural damage: A hairline crack at a hinge weld is a 20-minute fix. A gate that was struck by a vehicle, twisted off its posts, and dragged six inches out of its opening is a multi-hour structural job. The difference in final price can easily be 4x on the same gate model just based on damage severity.
- Operator brand compatibility: When a weld repair is connected to a motor mounting issue, the brand of operator matters. Dennis works across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. Getting the mounting geometry right for a BFT arm versus a Viking arm, for example, requires different bracket positioning — and incorrect geometry shortens motor life. That diagnostic step is not optional if you want the repair to last.
- Parts sourcing and lead time: Everest fabricates many parts in-house, which eliminates supplier lead time for standard bracket shapes, hinge plates, and frame sections. However, specialty components — electrified gate locks, specific DoorKing or FAAC replacement hardware — may need to be ordered, which can extend the timeline and occasionally the price if expedited shipping applies.
- Irving soil conditions and post anchoring: Irving sits on expansive clay soil, particularly in older residential areas north of SH-183. Clay heave during wet winters and dry summers causes gate posts to lean, which progressively stresses weld joints at the frame-to-post connection. Posts that have shifted more than a few degrees often need re-anchoring before welding is worthwhile — otherwise the repair cracks again within a season.
- Access and site conditions: Commercial properties along the DFW Airport corridor and the Las Colinas urban center sometimes have access restrictions, landscaping obstructions, or decorative concrete that adds time to a job. Residential driveways in gated HOA communities in Irving may require coordination with property management, which we factor into scheduling but not pricing.
How to Save on Gate Parts & Welding in Irving
Address Small Problems Before They Become Structural Ones
A loose hinge that costs $85 to replace today can become a frame crack that costs $400 to weld if the gate is operated for another six months while sagging. Irving’s summer heat — routinely above 100°F from June through September — accelerates metal fatigue at weld joints, especially on gates that already have stress fractures starting. Catching these early is the most reliable way to keep the total repair bill low.
Combine Repairs in a Single Visit
If you know the gate has a bent wheel and a worn latch, getting both handled in the same visit saves you a second service call fee. Dennis does a full visual inspection on arrival, so if there’s a developing crack near the receiver bracket while he’s replacing the roller, he’ll flag it before it becomes an emergency. Bundling is the single most effective way to reduce per-repair cost on older gates.
Ask About In-House Fabrication vs. Off-Shelf Parts
Specialty brackets and custom hinge plates ordered from a manufacturer can carry a significant markup and a 3–10 day lead time. Everest’s in-house fabrication capability means that for standard geometries, Dennis can cut, grind, and weld a replacement part on the spot at a cost that often beats the manufacturer part price. Ask specifically whether the component you need can be fabricated — the answer is yes more often than homeowners expect.
Don’t Let Gate Welding Sit on the “Later” List
We understand budgets are real. But a gate that’s wired open while you wait to schedule a repair is also a security gap for your Irving property — something no amount of money saved on the repair makes up for if something goes wrong. Prioritize structural repairs on the frame and post connections; cosmetic touch-ups can wait.
Get a Free Estimate First
Before committing to any gate parts or welding job, call (855) 914-8517 for a free estimate. Dennis or his team will give you an accurate, itemized number before any work starts — no vague “we’ll figure it out once we open it up” pricing that triples the bill by the end of the day. Estimates are free, and the diagnostic fee is credited back when you book the repair same day.
If you’re comparing options across the Metroplex, our Gate Parts & Welding in Fort Worth page covers pricing specifics for that market, which runs on similar cost drivers but with some differences in commercial project scope.
FAQs — Gate Parts & Welding Cost in Irving, TX
How much does gate welding cost in Irving, TX?
Gate welding in Irving typically costs $120 to $650 for structural frame repairs, and $85 to $220 for smaller component welds like hinges, brackets, and receiver plates. Full gate panel fabrication starts around $650 for basic residential designs and can reach $1,800 for larger or custom commercial panels. Call (855) 914-8517 for a free, itemized estimate — pricing is confirmed before any work begins.
Is it cheaper to repair or replace a damaged gate in Irving?
Repair is almost always less expensive than replacement when the gate frame is fundamentally intact. A gate with a cracked weld, a bent picket section, or a failed hinge is a repair candidate — full replacement only makes economic sense when the frame is so compromised (from a major vehicle impact or years of deferred maintenance) that weld repairs would exceed 60–70% of a new gate’s cost. Dennis will give you an honest comparison on-site, because replacing a gate that could have been welded for $300 doesn’t serve anyone’s interests. Find more context about what we do on our home page.
Can you get same-day gate welding service in Irving?
Yes — for most hinge, bracket, frame crack, and roller repairs in Irving, same-day service is available when you call before noon. Everest carries steel stock, welding equipment, and the most common hardware components aboard the work truck, so the majority of residential welding jobs don’t require a second visit for parts. Complex commercial fabrication may require 2–5 business days for custom panel work, but emergency structural repairs that affect gate operation are prioritized.
Why does gate welding cost more on some Irving properties than others?
The three biggest variables are gate material (heavy-wall steel costs more time and rod than light aluminum), the extent of structural distortion (a gate that needs to be re-squared before welding adds 30–90 minutes of labor), and site access conditions. Irving’s clay soil is also a genuine factor: posts that have heaved and tilted from seasonal ground movement need to be stabilized before a weld repair will hold long-term, and that stabilization adds cost. Properties in North Irving near the older residential streets off Beltline Road see this most frequently.
Does Everest Gate Repair Service fabricate custom gate parts in Irving?
Yes — in-house fabrication is one of the core reasons Irving customers call Everest over a general handyman or a shop that outsources metalwork. Dennis fabricates replacement hinge plates, mounting brackets, receiver arms, motor mount adapters, and custom frame sections on-site for most standard jobs. When a manufacturer part would cost more and take longer to arrive than a fabricated equivalent, that’s exactly the conversation Dennis has before ordering anything. Custom full-panel fabrication for residential driveways in Irving starts around $650 and scales based on height, width, material, and design complexity.
Key Takeaways
- Most Irving gate parts and welding jobs fall between $150 and $650 for common residential repairs.
- Structural frame welding runs $120 – $650; hinge and bracket work is typically $85 – $220.
- Irving’s expansive clay soil accelerates post lean and frame stress — early repairs prevent more expensive structural work later.
- In-house fabrication means Everest can often replace a part the same day rather than waiting on a manufacturer order.
- Dennis Price operates as both owner and lead technician — you get the decision-maker on your property, not a sub.
- 707 verified reviews averaging 4.8 stars across 11 years reflect thousands of completed gate jobs in the DFW area.
- Estimates are free — call (855) 914-8517 before authorizing any work.
Ready for a Free Estimate on Gate Parts & Welding in Irving?
Whether you’re dealing with a hairline weld crack on a residential driveway gate off Rochelle Road, a battered commercial slide gate on an Irving warehouse property, or a decorative iron panel that needs new pickets welded in, Dennis Price and the team at Everest Gate Repair Service are equipped to handle it — materials, fabrication, and welding all in one visit. With 11 years of focused gate work in Irving and the broader DFW Metroplex, 707 verified reviews averaging 4.8 stars, and the ability to service nine major operator brands, there’s no gate problem we’ll arrive unprepared for.
Call (855) 914-8517 to schedule your free estimate. Pricing is upfront, the diagnostic fee is credited on same-day repairs, and Dennis will walk you through every line item before a single weld bead is laid.
Pricing reflects the Irving, TX market as of 2026. Everest Gate Repair Service Dallas Fort Worth offers free estimates — call (855) 914-8517.
Written by Dennis Price, Owner at Everest Gate Repair Service Dallas Fort Worth, serving Irving, TX since 2013.