Fast, Reliable Gate Parts & Welding Across Keene
Gate parts and welding repair in Keene typically runs $180–$650 depending on whether you’re fixing a single hinge or replacing a full post-and-pier assembly, and most jobs we complete same-day or next-day. We’re familiar with Keene’s 76059 properties — from the modest ranch homes near Southwestern Adventist University to the acreage lots along Hill College Drive — and we understand why your gate is failing before we even pull up. Call (855) 914-8517 for a free estimate.
Keene’s semi-rural character means most properties here rely on driveway pipe gates, wooden ranch-style gates, and basic ornamental iron rather than high-end automated systems. That older hardware has endured decades of North-Central Texas heat and Johnson County’s infamous black clay soil. When a hinge seizes or a post leans, you need someone who can fabricate parts on-site rather than order from a catalog and hope. Our Gate Parts & Welding team carries the welder, the stock steel, and the brand-specific knowledge to fix it where it stands.
Why Everest Gate Repair Service Dallas Fort Worth Is Keene’s Preferred Gate Parts & Welding Company
We’ve been driving to Keene from our Irving base for 11 years, and the pattern is unmistakable: the gate itself is rarely the real problem. The post is leaning. The clay won. That’s the call we get from Keene homeowners again and again, and it’s why Dennis Price personally handles the diagnosis — not a subcontractor guessing at soil depth from a checklist.
Our 707 verified reviews average 4.8 stars, and that volume matters. It reflects thousands of completed jobs, not a handful of testimonials. Keene customers specifically mention our willingness to explain why their post failed and how deep the new pier needs to go. We’re not the cheapest bid you’ll find, but we’re the one that doesn’t come back next spring with the same lean.
Response time to Keene is typically same-day or next-day for welding and parts calls. We keep common hinges, rollers, and latch hardware in stock, plus steel stock for custom fabrication. For automated gates, we carry parts for nine major brands — so your existing FAAC, LiftMaster, or Elite operator doesn’t get ripped out and replaced with whatever was on the truck.
Dennis and his team know the difference between Keene’s Blackland Prairie clay and the sandy soils west of here. That local soil knowledge saves Keene property owners from repeated post replacements. We quote footing depth before we quote anything else.
Our Gate Parts & Welding Services in Keene
Hinge Replacement
Keene’s alternating wet springs and parched summers create aggressive shrink-swell cycles that stress every weld point. Hinges on older wooden ranch gates and ornamental iron systems crack at the weld, seize from rust, or elongate their bolt holes until the gate sags and drags. A typical hinge replacement in Keene runs $180–$320 for standard residential hardware, including removal of the rusted assembly and welding in a new, properly aligned hinge plate. On properties near Woodland Crescent or along the older stretches of Hill College Drive, we regularly encounter original 1980s hinges that have lost their pin tolerance — we replace with greasable, heavy-duty hinges that survive the clay movement.
Post Replacement
This is the big one in Keene. Blackland Prairie clay soil expands and contracts so aggressively that gate posts set without at least 48-inch-deep concrete piers can visibly lean within two growing seasons, a failure pattern far more extreme than in the sandy soil communities just west of Johnson County. Post replacement in Keene typically costs $450–$650 including the reinforced pier, proper drainage backfill, and rehang of the existing gate. We use 48-inch minimum depth with rebar reinforcement, and we angle the concrete bell to resist uplift. On Keene’s acreage lots, this is non-negotiable. We’ve seen “repaired” posts from other contractors lean again in 18 months because they skimped on depth. Dennis won’t spec a post replacement without proper footing — it’s why our Keene customers don’t call us twice for the same post.
Rail Repair
Bent or broken gate rails from vehicle contact, fallen limbs, or decades of gravity loading are common on Keene’s older pipe gates and ranch-style entrances. Rail repair runs $220–$400 depending on whether we’re straightening and re-welding existing stock or cutting and splicing new steel. The summer heat exceeding 100°F warps untreated wooden top rails on older gates; we often replace with steel box tubing or treated dimensional lumber that won’t twist. For ornamental iron gates in Keene, we match existing profiles from our stock or fabricate custom sections in the field.
Custom Welding
Not every Keene gate failure fits a catalog part. We weld, we wire, we repair — and the welding capability is what separates us from handymen who bolt on universal hardware. Custom welding in Keene ranges from $200 for simple hinge plate fabrication to $500+ for structural frame reinforcement or complete gate extension. On a 1980s ranch-style gate on Hill College Drive, the original FAAC operator had seized from decades of clay-heave misalignment. We replaced the twisted post with a 48-inch-deep reinforced pier, swapped in a new LiftMaster slide operator, and retrofitted the Woodland Crescent home’s original weld with a rust-resistant hinge plate. That’s the kind of integrated repair Keene properties need — not a band-aid on symptoms, but fixing the root cause and the damage it caused.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keene
Your brand, our expertise. We stock and service parts for LiftMaster, FAAC, Elite, and Mighty Mule operators commonly found on Keene automated gates, plus five additional major brands. Most Keene properties with automation run mid-tier residential openers from the 2000s–2010s — we carry replacement gears, limit switches, and control boards for these units, avoiding the “replace the whole operator” upsell when a $40 part solves it. For properties near Southwestern Adventist University or the newer construction on Keene’s eastern edge, we also support BFT, Linear, Viking, Ghost Controls, and DoorKing systems. Our parts inventory and brand fluency mean faster turnaround for Keene customers — no waiting on a distributor to guess which board you need.
Common Gate Parts & Welding Problems We See in Keene Homes
- Post lean from shallow footings in expansive clay. Keene’s black clay swells when wet and shrinks when dry, exerting thousands of pounds of lateral force on gate posts. Posts set at 24 inches — standard in sandy soils — lean visibly within two to three seasons. The gate drags, the opener strains, and eventually the motor fails. We fix the pier first, then the gate.
- Weld cracks at hinge points from seasonal heave-and-settle cycles. After freeze-thaw winters like the ice storms that hit the DFW corridor every few years, Keene gates develop fresh cracks at stress-concentrated welds. These aren’t cosmetic — they propagate until the hinge separates. We grind, prep, and re-weld with proper penetration, often adding gusset plates for reinforcement.
- Original 1970s–1990s spring assemblies that have lost temper. Decades of 100°F+ DFW summers anneal torsion and extension springs, reducing their stored energy. A gate that once swung smoothly now feels heavy or slams shut. We replace with correctly specced springs — not stronger “to be safe,” but matched to the gate weight and geometry.
- Rusted latch and lock hardware from humidity swings. Keene’s humidity spikes in spring and crashes in August, accelerating corrosion on unpainted iron hardware. Latches stick, lock cylinders seize, and electric strikes fail to release. We fabricate or source replacement hardware, often upgrading to stainless or zinc-plated components.
Pricing for Gate Parts & Welding in Keene, TX
| Service | Typical Range in Keene |
|---|---|
| Hinge replacement (single) | $180–$320 |
| Post replacement with 48″ pier | $450–$650 |
| Rail repair / straightening | $220–$400 |
| Custom welding (field fabrication) | $200–$500+ |
| Gate roller replacement (set) | $160–$280 |
| Latch / lock replacement | $140–$260 |
What moves you within these ranges? Gate size and weight, material type (steel vs. aluminum vs. wood), accessibility for our welding rig, and whether the failure is isolated or symptomatic of deeper problems like post lean. A hinge replacement on a plumb post is straightforward. A hinge replacement on a leaning post means fixing the pier first — or the new hinge tears out in a year. We diagnose on-site, explain what we see, and give you an upfront number before we strike an arc. Estimates are free. Call (855) 914-8517 to schedule.
We Also Serve Cities Near Keene
Our welding rig and parts inventory cover Johnson County and southern Tarrant County regularly. We serve Joshua to the east, Burleson to the northeast, Crowley to the north, and Everman across the county line — all with the same 11-year standard and Dennis Price’s direct involvement. If you’re on an acreage lot or managing an HOA entrance in any of these communities, the same clay-soil expertise and brand-specific parts capability apply.
Serving Keene, TX — Our Local Coverage Area
We’re based in the Keene area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Parts & Welding in Keene
Keene sits directly on Johnson County’s expansive black clay (Blackland Prairie) soils, which swell and contract dramatically through the region’s wet-dry cycles. This chronic soil movement exerts far more lateral pressure than sandy soils, making shallow-set posts lean visibly within two to three seasons. The fix is a 48-inch-deep reinforced concrete pier below the active clay zone — something we spec on every Keene post replacement. Call (855) 914-8517 and we’ll check your footing depth.
Repair makes sense when the frame is sound and the failure is isolated — a seized hinge, a cracked weld, a tired spring. Upgrade becomes the better investment when your original hardware has suffered multiple failures, the gate frame itself is twisted from post lean, or you’re spending annually on band-aid fixes. For Keene’s 1970s–1990s housing stock, we typically recommend repair if the post is plumb and the gate material is solid; retrofit with modern operator and hinge hardware if the clay has already won. We’ll give you both numbers and our honest read. Estimates are free — call (855) 914-8517.
Yes, and we do it regularly — but welding rusted hinge plates without addressing the underlying cause is a short-term fix. We grind to clean metal, verify the post is plumb, and often fabricate a new hinge plate with better geometry to distribute load. For ornamental iron gates in Keene, we match existing profiles and use rust-resistant coatings. Same-day welding is available for most residential calls. Call (855) 914-8517 to schedule.
Most post replacements in Keene take 3–5 hours from arrival to operational gate, assuming standard soil conditions and no buried utilities conflicts. The concrete pier needs 24–48 hours to cure before full load, but we can often prop and secure the gate for immediate security. Rural properties with longer runs or multiple gates may need a full day. We’ll give you a specific timeline when we see the site. Call (855) 914-8517 for scheduling.
We service and stock parts for nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Keene’s automated gates tend toward LiftMaster and FAAC on older installations, with Elite and Mighty Mule appearing on mid-range residential systems. We carry replacement control boards, limit switches, gear assemblies, and safety sensors — same-brand service, not trial-and-error guessing. Call (855) 914-8517 with your model number and we’ll confirm parts availability.
Ready to fix your gate right — post, weld, and all? Dennis and his team are standing by. Call (855) 914-8517 for your free estimate. We serve Keene, 76059, and all surrounding Johnson County communities with 11 years of gate-only expertise and the welding capability to finish the job where it stands.
Written by Dennis Price, Owner at Everest Gate Repair Service Dallas Fort Worth, serving Keene and the Dallas-Fort Worth area since 2013.