Fast, Reliable Gate Parts & Welding Across Kennedale
Gate parts and welding repair in Kennedale typically runs $180–$650 depending on whether you’re dealing with a bent hinge on a suburban swing gate or a heaved post on a heavy pipe ranch entrance. Most jobs are completed same-day, and Dennis Price personally handles the welding and structural work rather than sending a subcontractor.
We’re familiar with Kennedale’s split personality — the 1970s ranch homes on oversized lots near Mansfield Highway, the newer subdivisions closer to Kennedale Parkway, and the horse properties out toward the eastern edge of the 76060 ZIP. That mix means we carry parts for ornamental iron driveway gates and heavy 2-3/8″ steel pipe ranch gates on the same truck. If your post has heaved in last summer’s clay shrinkage or your hinge has finally rusted through after twenty Texas winters, call us at (855) 914-8517 for a free estimate. Our Gate Parts & Welding team works from our Irving base and routes to Kennedale daily.
Why Everest Gate Repair Service Dallas Fort Worth Is Kennedale’s Preferred Gate Parts & Welding Company
Eleven years specializing exclusively in gates means we’ve seen Kennedale’s specific failure patterns before — the shallow concrete footings that don’t survive Tarrant County’s Vertisol clay, the legacy pipe gates that need custom welding because no off-the-shelf hinge fits, the old openers with discontinued parts where you need honest advice on patch versus replace.
Our 707 verified reviews averaging 4.8 stars include plenty from Kennedale property owners who found us after general handymen couldn’t handle the scale of their ranch hardware. Dennis Price shows up as lead technician, diagnoses the actual brand and mechanism you’ve got installed, and welds structural repairs on-site instead of deferring to a separate metal shop. That matters when you’re dealing with a 400-pound pipe gate that’s your livestock perimeter, not just a driveway ornament.
We route to Kennedale from Irving with parts inventory for LiftMaster, Ghost Controls, Viking, and other major brands, so most repairs don’t wait on shipping. For welding and fabrication work, the equipment travels with us — no second appointment, no “we’ll send this out.”
Our Gate Parts & Welding Services in Kennedale
Hinge Replacement
Kennedale’s legacy steel pipe gates — common on the older ranch-style lots off Mansfield Highway and toward the eastern 76060 parcels — use heavier hardware than suburban ornamental gates. When original hinges rust through or bend under years of clay-soil sag, we source or fabricate replacements rated for the actual load. A typical hinge replacement on a heavy pipe gate in Kennedale runs $180–$320 including removal of the old hardware and alignment of the gate leaf. For ornamental iron residential gates in newer Kennedale subdivisions, hinge work usually falls in the $140–$240 range.
Post Replacement
This is where Kennedale’s geography makes us work harder than in neighboring Arlington. The black clay (Vertisol) soils shrink dramatically during July–September dry spells and heave back in wet winters, systematically pulling shallow-set posts out of plumb. We recently serviced a 1970s ranch-style home on a 3-acre lot off Mansfield Highway, where a 16-foot swing gate with a Ghost Controls opener had sagged so badly the latch wouldn’t engage. The original concrete footing had heaved over 3 inches, so we replaced the post with a deep-belled pier (40″ deep) to anchor past the clay and installed a new heavy-duty hinge set. The homeowner opted to keep the old opener after we rewired the limit switches, saving them a full retrofit. Post replacement with proper deep footing in Kennedale typically runs $380–$650.
Rail Repair
Whether it’s a bent top rail on an ornamental iron gate near Kennedale Parkway or a cracked horizontal on a pipe fence line out toward the horse properties, we weld rail repairs in place. Kennedale’s mix of suburban and semi-rural stock means we see everything from 1-1/2″ ornamental tubing to 2-3/8″ schedule-40 pipe. Rail welding and reinforcement runs $200–$450 depending on material gauge and whether the damage is localized or indicates a deeper structural issue with the frame.
Custom Welding
Our in-house welding capability is what separates us from gate companies that only bolt on prefab parts. Kennedale’s concentration of custom-built ranch gates — often fabricated decades ago by individual property owners or small local shops — means standard replacement parts simply don’t exist. We weld new hinge bosses onto existing frames, fabricate latch strikers for non-standard gate widths, and repair cracked weld joints on original pipe gates. Custom welding in Kennedale starts around $220 for straightforward fabrication and runs to $550+ for complex structural rebuilds.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kennedale
We maintain parts inventory and technical fluency across nine major gate operator brands — your brand, our expertise. In Kennedale, we regularly service LiftMaster swing and slide gate openers in the newer subdivisions, Ghost Controls and Viking units on horse properties and rural driveways, and DoorKing and Elite systems on commercial and HOA entrances. Because Dennis Price is factory-trained or field-experienced across all nine brands, we don’t guess at diagnostics or substitute incompatible parts. For Kennedale customers, that means same-day resolution when the part is in our stock, and honest guidance when a discontinued component means evaluating repair versus upgrade.
Common Gate Parts & Welding Problems We See in Kennedale Homes
- Shallow concrete footings heaving with clay soil. Kennedale’s expansive black clay pulls posts out of plumb every dry season, causing hinge-side sagging that returns annually unless the root cause is addressed with deep-belled piers past the active soil zone.
- Heavy legacy steel pipe gates with rusted or bent original hinges. The 2-3/8″ pipe gates common on Kennedale’s rural-residential parcels often have hinges that haven’t been serviced in fifteen or twenty years — custom welding is frequently the only way to preserve the original gate frame.
- Old gate openers past service life with discontinued parts. Ghost Controls and Viking units on horse properties may have components no longer manufactured, forcing a real decision between patch repairs, compatible retrofits, or full upgrade to modern operators.
- Rusted latch and lock hardware on older ranch gates. Kennedale’s humidity swings and occasional hard freezes corrode mechanical hardware faster than in drier climates, especially on gates that don’t see daily use.
Pricing for Gate Parts & Welding in Kennedale, TX
| Service | Typical Range in Kennedale |
|---|---|
| Hinge replacement (ornamental iron) | $140 – $240 |
| Hinge replacement (heavy pipe gate) | $180 – $320 |
| Post replacement with standard footing | $280 – $420 |
| Post replacement with deep-belled pier | $380 – $650 |
| Rail welding and repair | $200 – $450 |
| Custom fabrication / welding | $220 – $550+ |
| Opener parts repair (diagnostic + parts) | $160 – $340 |
What moves you within these ranges? Material gauge (ornamental iron versus heavy pipe), footing depth required to beat Kennedale’s clay heave, and whether we’re matching existing hardware or fabricating custom. We don’t quote over the phone for structural work — every gate frame has its own history of stress and repair. Call (855) 914-8517 for a free on-site estimate with upfront pricing before any work begins.
We Also Serve Cities Near Kennedale
Our daily routes from Irving cover the full southern Tarrant County arc. We regularly handle gate parts and welding calls in Everman and Rendon to the south, Forest Hill to the west, and Arlington to the north — though Arlington’s denser suburban grid rarely sees the heavy pipe gate and clay-heave patterns that define our Kennedale work.
Serving Kennedale, TX — Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Parts & Welding in Kennedale
Shallow concrete footings in Kennedale’s expansive black clay (Vertisol) soil will heave and tilt every time the moisture cycle shifts — dry summers shrink the clay, wet winters expand it. The only lasting fix is a deep-belled pier set 40 inches or more below grade, past the active soil zone. We’ve replaced dozens of heaved posts on Kennedale’s rural parcels, and the ones that stay plumb are the ones we anchored deep enough to ignore the surface clay. Call (855) 914-8517 and we’ll assess your current footing depth — estimates are free.
Some Ghost Controls components from the early 2000s are discontinued, but we carry cross-compatible parts and can often rebuild limit switch assemblies or replace control boards with current-production equivalents. When the part is truly obsolete, we’ll give you honest numbers on a compatible modern upgrade versus the patch — no pressure either way. Call (855) 914-8517 with your model number for a straight answer.
Yes. We weld heavy-duty hinge bosses onto existing 2-3/8″ pipe frames in the field, matching the geometry of your gate rather than forcing a generic bolt-on hinge that won’t fit. For Kennedale’s legacy pipe gates, this is often the only way to preserve the original gate while fixing the actual failure. Most on-site hinge fabrication and welding runs $220–$380. Call (855) 914-8517 to schedule — we bring the welder to you.
Many LiftMaster operators from that era can accept modern MyQ or compatible smart control modules without replacing the entire motor assembly. We evaluate the existing control board, limit logic, and safety entrapment devices to confirm compatibility before recommending any add-on. If your unit is too old for safe smart integration, we’ll quote a modern LiftMaster replacement that fits your existing gate geometry. Call (855) 914-8517 for a compatibility check — estimates are free.
We fabricate replacement latch strikers and weld repair boxes for non-standard hardware that hasn’t been manufactured in decades. For Kennedale’s older ranch gates, “antique” usually means custom-fabricated by the original property owner or a long-gone local welder — so we reverse-engineer the function and build a replacement that matches. Basic latch repair or replacement runs $140–$260; full custom fabrication for unusual mechanisms runs higher. Call (855) 914-8517 to describe what you’ve got.
Ready to fix your gate right? Whether it’s a heaved post on a Mansfield Highway horse property or a bent hinge on a suburban swing gate near Kennedale Parkway, Dennis Price handles the diagnosis and welding personally. Call (855) 914-8517 for a free estimate — we route to Kennedale daily and most parts and welding jobs finish same-day.
Written by Dennis Price, Owner at Everest Gate Repair Service Dallas Fort Worth, serving Kennedale and the greater DFW area since 2013.