How Much Does Gate Repair Cost? (2026 Price Guide) — Fort Worth | Call Now-10% Off | On-Site in 60 Minutes | Free Estimate

How Much Does Gate Repair Cost in Irving?

Gate repair in Irving, TX typically runs between $95 and $850, depending on the type of repair, the gate’s drive system, and the brand of operator involved. Most residential swing or slide gate repairs — a hinge replacement, a motor tune-up, or an alignment fix — land in the $150–$400 range and are completed the same day Dennis arrives on site. For structural damage requiring in-house welding or a full motor replacement on a commercial system, costs can reach $600–$1,200 or more.

Gate Repair Cost Breakdown (2026)

The table below reflects real pricing for Irving-area jobs completed by Everest Gate Repair Service in 2025–2026. These are not national averages pulled from a database — they’re drawn from the kinds of driveways and HOA entrances we service regularly in Las Colinas, Valley Ranch, Irving Heights, and along MacArthur Boulevard.

What moves a job toward the higher end of any range? Three things come up most often in Irving: (1) the gate hasn’t been serviced in several years, so wear has cascaded — one failing roller has put stress on the track, which has bent the arm bracket, which has forced the motor to overwork. Fixing the root cause means addressing all three. (2) The property has a heavier-gauge wrought-iron or steel gate, which is common in the Las Colinas and Valley Ranch communities, and replacement parts or weld material cost more for heavier stock. (3) The brand of operator matters significantly. A LiftMaster or Mighty Mule board replacement is straightforward because parts are widely available. A FAAC or BFT control board on a commercial slide gate takes more time to source and calibrate, and that complexity is reflected in the price.

What Affects Gate Repair Pricing in Irving

• Gate type and weight: Slide gates on a track — extremely common at Irving apartment complexes and HOA entrances off Rochelle Road — involve more mechanical components than a single-swing residential gate. More components means more potential failure points and, when something breaks, a longer repair window.
• Operator brand and parts availability: Dennis and his team work across nine brands — LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule — so brand-specific diagnostics never slow us down. That said, some older DoorKing or Elite control boards require special-order parts, which can add a few days and modest cost to a job.
• Irving’s summer heat and clay soil conditions: The DFW clay soil expands and contracts significantly through Irving’s hot, dry summers and occasional wet winters. This ground movement shifts gate posts and throws hinges out of plumb over time. In areas like Heritage Crossing and North Irving near SH-183, we see more post-lean and hinge stress than you’d find in cities with stable sandy soil — which means alignment repairs here are often more involved than a simple bolt-tighten.
• Structural vs. mechanical damage: A gate that’s been clipped by a vehicle in a parking lot or an HOA entrance off Esters Road needs more than a motor reset. In-house welding and frame fabrication are part of what we do, which keeps the repair under one job order rather than subcontracting the metalwork — but structural repairs are simply more labor-intensive than electronic ones.
• Access control complexity: A basic keypad swap runs $150–$250. A multi-tenant intercom panel with cloud-based access management on a commercial property can run $400–$650 just for the control side, separate from any mechanical gate work.
• Same-day urgency: Most of our Irving jobs are completed same day without a rush premium. However, if a property manager needs emergency access restored outside standard hours — common at Irving’s commercial corridors near Belt Line Road — emergency service rates apply and can add $75–$150 to the base repair cost.

How to Save on Gate Repair

The single most effective way to keep gate repair costs down in Irving is catching problems early. A gate that binds, hesitates, or makes grinding noises during operation is telling you something — and a $120 tune-up caught at that stage costs a fraction of the $600–$900 motor replacement that follows if the drive system is run to failure. Dennis frequently sees this pattern in Valley Ranch, where homeowners assume a slow-moving gate is just “getting old” when it’s actually a worn roller causing chain drag that’s already stressed the motor board.

• Ask for a free estimate before committing. We provide free on-site estimates for Irving homeowners and property managers. Call (855) 914-8517 and Dennis or his team can give you a firm number before a wrench turns.
• Bundle repairs in one visit. If the hinge is going and the keypad is acting up, address both in one trip. You pay one service call, not two.
• Don’t substitute wrong-brand parts. A LiftMaster gate arm replaced with an off-brand equivalent from a big-box store often fails within months and voids compatibility with the control board. Brand-matched parts cost more upfront but last significantly longer — and we stock them.
• Service your gate annually. Chain tension, hinge lubrication, limit switch calibration — a 45-minute annual service visit is the cheapest insurance against a $700 repair. For Irving HOAs managing high-cycle entrances, we recommend semi-annual checks.
• Repair before replacing when structurally sound. If your gate’s frame is solid and the motor is the only failure, replacing just the operator is nearly always the right call. A gate with a good iron frame and a fresh LiftMaster operator has years of reliable service ahead of it.

For an exact number on your specific gate and problem, give us a call at (855) 914-8517. Estimates are free, and there’s no obligation to proceed.

Why Irving Property Owners Call Everest Gate Repair Service

There are general handymen and there are gate specialists. After 11 years working exclusively on gates across the Dallas–Fort Worth area — including hundreds of jobs right here in Irving — Dennis Price and his team bring a depth of brand-specific knowledge that changes how quickly a problem gets solved. When Dennis walks up to a FAAC-powered slide gate at a Las Colinas commercial property, he’s not opening a manual. He knows the failure patterns on that system, has seen the control board error codes before, and usually has the relevant parts in the truck.

That same principle applies to the structural side. In-house welding capability means a gate that’s been knocked off its post by a delivery vehicle doesn’t require a two-stop repair process — fabrication, welding, reinstallation, and motor calibration happen under one job order. That saves Irving property managers both time and coordination headaches.

With 707 verified reviews averaging 4.8 stars, the track record is documented. That volume reflects thousands of completed jobs across the DFW area — not a handful of glowing testimonials collected on a good week. When an HOA board in Valley Ranch or a property manager on MacArthur Boulevard needs a gate specialist they can cite by name to residents, Dennis Price is the name that comes up.

We’re also the team behind Gate Repair in Fort Worth — so if you manage properties on both sides of the metro, one call covers the relationship. And if you’d like a broader overview of everything we do, our home page lays out the full scope.

FAQs — Gate Repair Cost in Irving, TX

How much does gate repair cost in Irving?

Most gate repairs in Irving fall between $95 and $850, with the majority of residential jobs landing in the $150–$400 range. Simple alignment or arm adjustments are on the lower end; motor replacements and structural weld repairs are on the higher end. Call (855) 914-8517 for a free estimate specific to your gate and situation.

Is it cheaper to repair or replace a gate in Irving?

Repair is almost always cheaper when the gate’s frame and posts are structurally sound. A residential gate motor replacement runs $350–$750 — still significantly less than a full gate and operator installation, which typically starts at $1,500 and goes up from there depending on gate size and operator type. We’ll give you an honest recommendation when we assess your gate — we’re not in the business of selling replacements when a repair does the job.

How long does gate repair take in Irving?

The large majority of Irving residential gate repairs are completed in 2–4 hours during the same visit as the diagnosis. More complex jobs — a bent frame requiring welding, or a commercial slide gate with a special-order control board — may take a second appointment, but most homeowners and property managers are back to full operation the day we arrive.

Do you charge for a service call or estimate in Irving?

We provide free on-site estimates for Irving customers. In most cases, the diagnostic visit fee is waived when you proceed with the repair. Call (855) 914-8517 to schedule — there’s no obligation.

Why is my gate opener working but the gate won’t open all the way?

This is one of the most common calls we get from Irving homeowners, and the answer is almost always one of three things: a worn or broken gate arm, a misaligned or debris-clogged track on a slide gate, or limit switches that need recalibration on the operator. All three are typically diagnosed in under 30 minutes and repaired the same day. Repair costs for these issues in Irving generally run $110–$280 depending on parts needed. Call (855) 914-8517 and we’ll figure out which one it is.

Can you repair any brand of gate operator in Irving?

Yes — Dennis and his team are experienced across nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Whatever’s already installed on your Irving property, we service it directly rather than defaulting to a full replacement. Brand-matched diagnostics and parts mean faster repairs and longer-lasting results.

Do you repair commercial gates in Irving?

Absolutely. A significant portion of our Irving work is commercial — HOA entrances in Las Colinas, apartment complex gates near SH-114, and business park access systems along Belt Line and Esters Road. Commercial gate motor replacement typically runs $600–$1,400 depending on the operator brand and gate size. Access control system repairs and upgrades are priced separately based on the system’s complexity. Call for a free commercial estimate at (855) 914-8517.

Key Takeaways:

• Irving gate repair costs range from $95 to $1,200+, with most residential repairs between $150–$400.
• Clay soil movement and high summer heat are local factors that accelerate gate wear in Irving.
• Repair almost always beats replacement when the gate frame is structurally intact.
• Annual maintenance visits keep costs down over the life of the gate.
• Dennis Price is on-site as lead technician — you get the owner and decision-maker, not a subcontractor.
• Free estimates, no obligation — call (855) 914-8517.

Get a Free Gate Repair Estimate in Irving Today

If your gate is stuck, slow, misaligned, or making sounds it didn’t used to make, the fastest path to an accurate repair cost is a conversation with someone who’s seen your exact situation before. Dennis Price has been solving gate problems in Irving and across the DFW area for 11 years — with 707 reviews and a 4.8-star average to show for it. Call (855) 914-8517 for a free, no-pressure estimate. We’ll tell you exactly what’s wrong, what it’ll cost to fix it, and how long it’ll take — before we start.

Pricing reflects the Irving, TX market as of 2026. Everest Gate Repair Service Dallas Fort Worth offers free estimates — call (855) 914-8517.

Written by Dennis Price, Owner and Lead Technician at Everest Gate Repair Service Dallas Fort Worth, serving Irving, TX since 2013.