Gate Parts & Welding in Joshua, TX | Everest Gate Repair Service Dallas Fort Worth

Gate Parts & Welding in Joshua - Welded and Fitted, Priced Up Front

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Up to 11
Years Technician Experience
707+
5-Star Reviews
Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Fast, Reliable Gate Parts & Welding Across Joshua

Gate parts and welding repair in Joshua typically runs $180–$650 depending on whether you’re dealing with a tilted post, rusted hinge, or bent frame, and most jobs are completed same-day. We’re the team at Everest Gate Repair Service Dallas Fort Worth, and we make the drive down Highway 174 from our Irving base to Joshua regularly - usually within 90 minutes for urgent calls. After 11 years specializing exclusively in gates, we’ve learned that Joshua’s mix of legacy ranch properties and newer acreage subdivisions creates repair challenges you won’t find in denser DFW suburbs. If your gate is binding, sagging, or your opener suddenly quit, call us at (855) 914-8517 for a free, on-site estimate.

Professional welding steel gate parts with MIG welder in workshop in Joshua, TX

Call (855) 914-8517

Why Everest Gate Repair Service Dallas Fort Worth Is Joshua’s Preferred Gate Parts & Welding Company

We’ve built our reputation in Johnson County one post at a time - 707 reviews averaging 4.8 stars, many from homeowners right here in the 76058 ZIP. That matters in Joshua, where a “failed” opener often turns out to be soil-heaved post that needs realignment before any motor diagnosis makes sense.

Our response time to Joshua averages under two hours for emergency calls - we know the rural roads west of town and the newer subdivisions near Joshua High School equally well. When you’re dealing with a gate that won’t close at dusk or an HOA entrance that’s stuck open, you need someone who recognizes the problem without a learning curve. Our Gate Parts & Welding team carries the tools, stock, and brand knowledge to fix it on the spot.

Our Gate Parts & Welding Services in Joshua

Hinge Replacement

Joshua’s black clay doesn’t just heave posts - it destroys hinges. When a post tilts even slightly, the hinge pin carries load at an angle it was never designed for. We’ve replaced seized and cracked hinges on everything from 1980s tubular steel ranch gates off Slater Road to ornamental iron driveway gates in the newer subdivisions near Alsbury Boulevard. A typical hinge replacement in Joshua runs $180–$320, including removal of the old hardware and realignment of the gate leaf. We stock heavy-duty ball-bearing hinges rated for the weight shift that Joshua’s soil conditions create.

Hinge Replacement

Post Replacement

This is the service performed most often in Joshua, and it’s almost always tied to the Blackland Prairie’s expansive clay. That wet-winter, dry-summer cycle rotates wooden corner posts and leans concrete-set steel posts out of plumb. On a rural property along Slater Road, we arrived for what the owner thought was a failed LiftMaster opener. The gate was binding at the hinge side, and a quick check showed the wooden corner post had rotated nearly three degrees after a wet spring, pulling the travel path off center. We reset the post with a concrete collar and realigned the operator arm - the opener worked fine once the post was plumb. Post replacement in Joshua typically costs $350–$650 depending on depth, diameter, and whether we’re dealing with clay-only or rock substrate.

Post Replacement

Rail Repair

The horizontal rails on ornamental gates take a beating from two directions in Joshua: soil movement stresses the frame, and spring hailstorms dent aluminum and bend lighter steel. We straighten bent rails when possible and splice in new sections when the damage is too severe. For the older pipe-rail gates common on Joshua’s agricultural properties, we often find rust-through at the weld joints where decades of vibration met moisture trapped in the tube ends. Rail repair in Joshua runs $220–$480 depending on material and whether the gate needs temporary removal to our mobile welding rig.

Rail Repair

Custom Welding

Our in-house welding capability is what separates us from gate companies that outsource metalwork. We MIG and TIG weld steel, aluminum, and ornamental iron right at your property - no waiting for a separate shop, no transportation damage to an already-compromised gate. In Joshua, we regularly weld cracked hinge brackets back onto 1990s tubular steel frames, fabricate custom latch receivers for misaligned posts, and patch hail-damaged aluminum panels. Custom welding in Joshua starts at $200 for simple repairs and ranges to $550 for extensive frame reinforcement or panel fabrication. We match the original weld spec so the repair doesn’t become the next failure point.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 914-8517

Trusted Brands We Service in Joshua

Your brand, our expertise - that’s not a slogan, it’s how we work. We’re factory-trained or field-experienced across nine gate operator brands, and for Joshua customers, that means we stock or can rapidly source parts for FAAC, BFT, and Linear systems without the trial-and-error guessing that wastes your time. We’ve got Viking control boards and replacement arms in our inventory too. Because we specialize exclusively in gates, we don’t waste a service call figuring out whether your problem is the motor, the control board, or - as is common in Joshua - a post that’s rotated just enough to throw the limit switches out of calibration.

Common Gate Parts & Welding Problems We See in Joshua Homes

  • Clay soil heave rotates wooden corner posts, misaligning automatic openers and binding hinges. The black clay in Joshua’s 76058 ZIP expands when wet and contracts in drought, creating a slow-motion wrecking ball against gate alignment. We see this most on older rural properties where posts were set directly in soil without concrete collars or proper drainage.
  • Hail and straight-line winds dent aluminum panels and bend lighter steel frames on ornamental gates. Joshua sits in Tornado Alley proper, and the spring severe-weather season doesn’t discriminate - we’ve straightened frames and replaced dented pickets on gates from the subdivisions near Crowley Road and the acreage west of Highway 174.
  • Older tubular steel swing gates on gravel driveways have rusted-through weld joints at the hinge brackets. The 1980s and 1990s ranch gates common on Joshua’s legacy properties weren’t built with drainage holes in the tube ends. Moisture collects, rust works from the inside out, and one morning the hinge bracket separates from the frame. We cut out the rot and weld in new material that’s thicker and properly vented.
  • Automatic openers trip safety beams or stall mid-travel after soil movement changes the gate’s path. The opener isn’t broken - it’s protecting itself from a gate that’s now dragging or binding because the post shifted. We fix the geometry first, then recalibrate the operator.

Pricing for Gate Parts & Welding in Joshua, TX

Here’s what gate parts and welding costs in Joshua’s market - real numbers, not “call for pricing” vagueness:

Assortment of metal gate hinges, latches, and repair tools on a workbench in Joshua, TX
Service Typical Range in Joshua
Hinge replacement (single) $180–$320
Post reset with concrete collar $280–$450
Post replacement (new steel or wood) $350–$650
Rail straightening or splice repair $220–$480
Custom welding (mobile, on-site) $200–$550
Gate roller replacement (sliding gates) $160–$290
Latch and lock hardware replacement $140–$260

What moves you up or down within these ranges? Material type (aluminum costs more to weld than steel), accessibility (rural properties with long gravel drives take more setup time), and whether we need to match existing ornamental details. Every estimate we provide in Joshua is free and itemized - no obligation, no pressure. Call (855) 914-8517 to schedule yours.

We Also Serve Cities Near Joshua

Our service radius covers the full Johnson County and southern Tarrant County corridor. If you’re in Keene, Burleson, Crowley, or Everman, the same response standards and pricing structure apply - though Joshua’s clay-soil conditions are uniquely severe compared to the sandier substrates closer to Fort Worth.

Serving Joshua, TX - Our Local Coverage Area

We’re serving the Joshua area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs - Gate Parts & Welding in Joshua

Why Joshua Chooses Everest Gate Repair Service Dallas Fort Worth

We set the standard for gate parts & welding in Joshua.

Irving-Specific Response

Our team is based in the DFW area and prioritizes Irving service calls - meaning shorter lead times, faster same-day availability, and technicians familiar with local property types and soil conditions.

Residential & Commercial Coverage

We service single-family driveways, HOA entry gates, apartment communities, and commercial facilities throughout Irving with equal depth of expertise and documentation.

Transparent Pricing, No Surprises

Every estimate is written and itemized before work begins. If scope changes on-site, we stop, explain, and get your approval - your budget is treated with the same precision as your gate.

What Joshua Customers Say

Trusted by homeowners across Joshua and surrounding areas.

★★★★★

"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."

Yusuf Aziz
★★★★★

"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."

Jessica Lin
★★★★★

"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."

Brianna Jackson

How It Works in Joshua

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Joshua - typically within 30–60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

Ready for Gate Parts & Welding in Joshua?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Joshua.

(855) 914-8517

Request a Free Estimate in Joshua

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Areas We Serve
Call Now - 24/7 Dispatch